AR91.10-P-1070MB | Remove/install driver seat cushion | 15.12.09 |
MODEL 220.0 /1 as of 1.9.02 with CODE (803) Model year 2003
P91.10-2524-09
1 Seat cushion
2 Stowage compartment
3 Left side paneling
4 Screw
5 Screw
11 Bottom side paneling
12 Stowage compartment retaining frame
13 Paneling on belt end fitting
N32/15 Left front multicontour backrest control unit
N32/16 Right front multicontour backrest control unit
S108 Right front multicontour backrest switch group
S109 Left front multicontour backrest switch group
P91.10-2537-04
1 Seat cushion
7 Seat adjustment mechanism
14 Screw
bl Blue connector for fan motor
N32/1 Left front seat adjustment control unit with memory
N32/2 Right front seat adjustment control unit with memory
| Remove/install | ||
1 | Remove front seat | Move seat cushion all the way up and to center position so that rear bolt (14) on belt buckle is accessible. | |
2 | Open flap in stowage compartment (2) | ||
3.1 | Unclip stowage compartment (2) | ||
3.2 | Remove fire extinguisher | With fire extinguisher, code 682. | |
4 | Unscrew bolts (4, 2 each) from left side paneling (3) | ||
5 | Unscrew bolt (see arrow) at rear of paneling (13) on belt end fitting and remove | ||
6 | Unscrew bolt (5) from left side paneling (3) | ||
7 | Remove left side paneling (3) in direction of travel | ||
8.1 | Unclip bottom side paneling (11) in direction of arrow | With driver seat multicontour backrest, code 404b, passenger seat, code 405b. | |
9.1 | Remove pneumatic lines from lumbar support control valve | ||
9.2 | Remove connector coupling from left front multicontour backrest switch group (S109), right front multicontour backrest switch group (S108) | On driver seat multicontour backrest code 404b, passenger seat code 405b or left dynamic seat including multicontour seat code 433, right code 434 | |
10 | Remove omega clip (see arrow) from seat cushion frame | ||
11.1 | Remove connector coupling from dynamic seat switch | On left dynamic seat incl. multicontour seat code 433, right code 434. | |
12.1 | Remove multicontour backrest control unit from front seat | With driver seat multicontour backrest, code 404b, passenger seat, code 405b. | |
13 | Unscrew stowage compartment retaining frame (12) from cushion frame | ||
14 | Unscrew bolt (14, 2 each) and slide seat cushion (1) on seat adjustment mechanism (7) toward front | Bolt, seat cushion to seat adjustment mechanism Do not yet remove seat cushion (1) from seat adjustment mechanism. | |
15.1 | Disconnect blue connector on fan motor (bl) | For code (401a) front comfort seat, incl. seat heating and seat ventilation. | |
16.1 | Remove coupling for seat cushion heater (see arrow in magnifying glass) from left front seat adjustment control unit with memory (N32/1), right front seat adjustment control unit with memory (N32/2) | For front comfort seats, incl. seat heating and seat ventilation vehicles, code 401a or right and left front seat heaters or code 873. | |
17 | Remove seat cushion (1) from seat adjustment mechanism (7) | ||
18 | Install in the reverse order | ||
19 | Check seat adjustment for proper function |
Front seats