AR83.70-W-5808A | Remove/install housing segments | 16.1.98 |
MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H62) Warm air auxiliary heater "Eberspächer" D3 LP
W83.70-0050-06
1 Upper housing segment
2 Body-bound rivet
3 Outlet shroud
4 Lower housing segment
5 Gasket
| Remove/Install | ||
1 | Disconnect ground lead from battery | Do not interrupt main battery current in heater mode or in the power-down phase. | |
2 | Remove heater | Body 942.899 | |
Bodies 940.899, 972.899 | |||
3 | Remove outlet shroud (3) from housing segments (1, 4) | Press nose (arrow) of outlet shroud downward and remove outlet shroud. | |
4 | Remove expansion rivet (2) | Punch through expansion rivet drift (arrow A) and remove expansion rivet. Installation: Use new expansion rivet. | |
5 | Install in the reverse order | ||
Danger! | Risk of explosion caused by fuel vapors igniting, risk of poisoning caused by inhaling combustible gases and risk of injury caused by burns during and after operation of heater unit | Do not operate stationary heater, auxiliary heater or engine with heater booster in closed areas or when refueling. Allow heater unit to cool down after operation and wear protective gloves. | |
6 | Check function of stationary heater |
Henviste dokumenter
- ar8370w530202c
- ar8370w5302c
- ar8370w5302d
- as8370z000201a Fare for eksplosion på grund af brændstofdampe, fare for forgiftning ved indånding af forbrændingsgas og fare for personskade på grund af forbrændinger, under eller efter at varmesystemet har været i drift.