Remove/install glow pin

AR83.70-W-5757E

6.3.07

MODEL 375.4 with BODY 375.860 with CODE (HH1) "Eberspächer D5W S" warm water auxiliary heater

MODEL 940, 942, 943, 944 with BODY 944.890 with CODE (HH1) "Eberspächer D5W S" warm water auxiliary heater

W83.70-1389-01

1 Auxiliary heating control unit

2 Combustion air blower panel

W83.70-1391-06

3 Plug housing

4 Electrical lines for glow pin

5 Glow pin

6 Fuel fitting

 	Remove/install
1	Remove heater unit		AR83.70-W-5302M
2	Remove auxiliary heater control unit (1)		AR83.70-W-5937E
3	Remove panel for combustion air blower (2)	 Installation: Do not damage the heat-protection mat.
4	Detach electrical lines for glow pin (4) from contact cavities 9 and 12 of connector housing (3)		*220589019950
			*000589139930
5	Unscrew glow pin (5) from fuel fitting (6)	 Counterhold fuel fitting (6) at the hexagon.
			*BA83.70-N-1022-03A
6	Install in the reverse order

 Auxiliary heater heating unit

Number	Designation		Model 375.4 with body 375.860 with (CODE HH1) Warm water auxiliary heater "Eberspächer D5W S"	Model 940, 942, 943, 944 with body 944.890 with (CODE HH1) Warm water auxiliary heater "Eberspächer D5W S"


BA83.70-N-1022-03A	Glow pin in fuel filler neck	Nm	6	6

000 589 13 99 30

MCP 2.8 / Fl blade. 2.8 / JPT / SPT

Blade holder with clamping pliers

220 589 01 99 50