P83.25-2189-09
Shown on model 171.4
1 Water collector
2 Battery cover
3 Quick-release fittings
6 Rubber seal
7 Grommets
4 Expansion clip
5 Sealing strip
| Remove/install | ||
1 | Remove wiper arms | ||
2 | Open quick-release couplings (3) and remove battery cover (2) | ||
3 | Remove expansion clips (4) | Installation: Replace damaged expansion clips (4). | |
4 | Lower engine hood to normal position | ||
5 | Raise water collector (1), release from apex seal (5) of windshield and remove | Installation: Pay attention to installation position of water collector (1) in apex seal (5) of windshield. | |
6 | Replace rubber seal (6) and grommets (7) | when replacing water collector (1). | |
7 | Install in the reverse order |