ar8325p1402v

Remove/install water collector

Type ar · topic 83.25 · version 0101 · 2011-01-10

Applies to: MODEL 171.4, 172.4

Where it sits

Function group 3 Body › 83 Climate control › 83.25 Automatic heater — Series 171 (models 4**) · Series 172 (models 4**)

EinPAS 35 Body/frame/detachable parts › 35.38 Bumper/spoiler/outer trim/stowage box/front protective paneling › 35.38.44 Trim/trim element/front protective paneling — Series 171 (models 4**) · Series 172 (models 4**)

AR83.25-P-1402V

Remove/install water collector

8.12.10

MODEL 171.4, 172.4

Remove/install water collector

P83.25-2189-09

Shown on model 171.4

1 Water collector

2 Battery cover

3 Quick-release fittings

6 Rubber seal

7 Grommets

4 Expansion clip

5 Sealing strip

Remove/install

1

Remove wiper arms

AR82.30-P-6100V

2

Open quick-release couplings (3) and remove battery cover (2)

3

Remove expansion clips (4)

Installation: Replace damaged expansion clips (4).

4

Lower engine hood to normal position

AR88.40-P-1000V

5

Raise water collector (1), release from apex seal (5) of windshield and remove

Installation: Pay attention to installation position of water collector (1) in apex seal (5) of windshield.

6

Replace rubber seal (6) and grommets (7)

when replacing water collector (1).

7

Install in the reverse order

Referenced documents