P83.25-0399-09
1 Screw
2 Philips screw
3 Jacket tube
4 Transverse pipe
5 Nut
12 Cockpit separation point
13 Connector
W1 Main ground (behind instrument cluster)
W29/2 Ground, right A-pillar
6 Connector
7 Screw
8 Fixture
9 Screw
10 Nut
11 Heater housing
| Removal, installation | ||
Danger! | Risk of injury to skin and eyes from scalding with hot coolant which splashes out. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
1 | Drain coolant | Installation: Pour in coolant. | |
2 | Remove water collector | ||
3 | Remove hot water feed and return hoses | Plug openings (parts kit). | |
4 | Remove instrument panel | ||
5 | Remove passenger airbag | ||
6 | Remove insulating mat | ||
N | Unscrew screws (1) | ||
8 | Remove main ground (W1) | ||
9 | Unscrew Philips screw (2) from cable duct | ||
10 | Unscrew nuts (arrow) and unhook jacket tube (3) off transverse pipe (4) | ||
11 | Unscrew nuts (5) | ||
12 | Pull off connector (6) on heater core temperature sensor | ||
13 | Unscrew screws (7) and remove holder (8) | ||
14 | Remove air ducts to side nozzles and rear air ducts on left and right | ||
15 | Expose electric wiring | Installation: Replace cable strapes | |
16 | Remove ground, right A-pillar (W29/2) | ||
17 | Unscrew nut (10) | ||
18 | Unscrew left and right screws (9) on | ||
19 | Remove transverse pipe (4) | Avoid damaging passenger compartment. | |
20 | Disconnect vacuum lines from cockpit separation point (12) | ||
21 | Pull off connector (13) | ||
22 | Remove heater housing (11) | ||
23 | Install in opposite order |
Henviste dokumenter
- ar2000p1142ha
- ar2000p1142ha
- ar6810p1000k Instrumentpanel af-, påmonteres
- ar8325p1402k
- ar9160p0680k
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske