Remove and install air distribution cables

AR83.10-D-1400A

Remove and install air distribution cables

7.7.99



Remove

1

Disconnect ground lead of battery

2.1

Remove stowage compartment below pen holder

Except code J19/J05, tachograph

2.2

Remove tachograph

with code J19/J05, tachograph

AR54.30-D-0001A

3

Remove cover on center part of instrument panel

AR68.10-D-1190A

4

Remove air conditioning pushbutton control module

With code H25, automatic heater control, "Heatmatic" or HH9, air conditioning control, "Tempmatic"

AR83.25-D-1124A

Except code H25, automatic heater control, "Heatmatic" or HH9, air conditioning control, "Tempmatic"

AR83.25-D-1124B

5

Unclip cables (1) at the heater housing and remove from the adjusting levers



Install

6

Clip cables (1) onto the adjusting levers

7

Attach cables (1) to the air conditioning pushbutton control module

 Danger of mix-up:

The cable on the lower adjusting lever must be attached to the front adjusting knurl of the air conditioning pushbutton control module

8

Adjust cables for air distribution (1)

AR83.10-D-1400-01A

9

Install air conditioning pushbutton control module

With code H25, automatic heater control, "Heatmatic" or HH9, air conditioning control, "Tempmatic"

AR83.25-D-1124A

Except code H25, automatic heater control, "Heatmatic" or HH9, air conditioning control, "Tempmatic"

AR83.25-D-1124B

10

Install covering on center part of instrument panel

AR68.10-D-1190A

11.1

Install stowage compartment below pen holder

Except code J19/J05, tachograph

11.2

Install tachograph

With code J19/J05, tachograph

AR54.30-D-0001A

12

Connect ground lead to battery

13

Set time on instrument cluster

Except code J19/J05, tachograph

14

Set time on timer for auxiliary heater

With code H12, hot-water auxiliary heater or H86, timer for auxiliary heater

15

Code radio if necessary