Remove and install air conditioning pushbutton control module

Type ar · emne 83.25 · version 0103 · 2002-03-14

Gælder for: MODELS 901.6, 902.6, 903.6, 904.6, 905.6 except CODE (H25) Automatic heater control "Heatmatic" except CODE (HH9) Automatic air conditioning "Tempmatic" MODEL 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"

Ikke tilgængelig på “da”; vises på Engelsk.

AR83.25-D-1124B

3.9.99

MODELS 901.6, 902.6, 903.6, 904.6, 905.6
except CODE (H25) Automatic heater control "Heatmatic"
except CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"

Remove and install air conditioning pushbutton control module

D83.20-1102-11

1 Air conditioning pushbutton control module

2 Pull wire

3 Pull wire

4 Connector

5 Pull wire

6 Screw

7 Bracket

 	Remove, Install
1.1	Remove stowage compartment below pencil holder	For version without tachograph, without code.
1.2	Remove tachograph	For version with tachograph, Code J19/J05.	AR54.30-D-0001A
2	Remove cover on center part of instrument panel		AR68.10-D-1190A
3	Unscrew bolts (6)
4	Identify cables (2, 3 and 5) and remove from the air conditioning pushbutton control module (1)	 Installation: The cable for the lower adjusting lever must be attached to the front adjusting knurl of the control and operating module for the climate control.
5	Pull out plug (4)
6	Unscrew bracket (7) on both sides	 Only if the control and operating module for climate control is replaced.
7	Install in the reverse order

Remove and install air conditioning pushbutton control module

Henviste dokumenter