1 | Screw |
2 | Screw |
E1 | Left front lamp unit |
E2 | Right front lamp unit |
P82.10-2003-12
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Danger | Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | |
1 | Open engine hood and move to vertical position | ||
2 | Remove front bumper |
| |
3 | Remove screws/bolts (1, 2) | ||
4 | Remove left front lamp unit (E1) and right front lamp unit (E2) towards vehicle center | Installation: Make sure that the ball head is seated in its socket on the housing of the left front lamp unit (E1) and right front lamp unit (E2) | |
5 | Unclip electrical connections (lighting and headlamp range adjustment) and remove | ||
6 | Install in the reverse order | ||
| Check | ||
7 | Adjust the zero position of the xenon headlamps | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Commercially available devices/tools: | |||
8 | Check and correct adjustment of headlamps | ||
|
Henviste dokumenter
- ad0000p200004a
- ad0000p200004a
- ap8210p8260m Kontrol, korrektion af forlygteindstilling
- ar8820p2000m Af-, påmontering af kofanger foran
- ar8840p1000m
- ar8840p1000m Åbning, lodretstilling og lukning af motorhjelm
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- as8210z000101a Fare for eksplosion/brandfare på grund af letantændelige stoffer i beskadigede xenon-pærers område. Fare for personskade på grund af UV-lys, varme komponenter på xenon-forlygter og glassplinter i forbindelse med, at xenon-pærer går