Shown on model 210 |
1 | Diagnostic connector |
2 | Diagnostic system |
P00.00-5442-06
Shown on model 204 |
1 | Diagnostic connector |
2 | Diagnostic system |
P00.00-5443-05
1 | Connect diagnostic system (2) to diagnostic connector (1). |
2 | Start diagnosis. |
3 | Select the model series in the menu. |
The work procedures in the diagnosis program are menu-assisted. |
Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations. |
4 | Disconnect diagnostic system (2). |
Following completion of diagnostic operations. |