AR68.30-W-4750B | Removing and installing rear wall paneling | 15.9.97 |
MODEL 375.1 with BODY 375.830 with CODE (F04) L-cab (long)
MODEL 375.3 with BODY 375.810 with CODE (F04) L-cab (long)
MODEL 375.4 with BODY 375.840 with CODE (F04) L-cab (long)
MODEL 944 with BODY 944.899 with CODE (F04) L-cab (long)
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F04) L-cab (long)
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F04) L-cab (long)
W68.30-0032-09
Illustrated on body 940.899
1 Rear wall paneling
2 Switch console connector
5 Screw
6 Spreading anchor
3 Switch console connector
4 Reading lamp connector
W68.30-0033-06
7 Reading lamp insert
8 Reading lamp lens
9 Cover grate
10 Switch console
11 Cover grate
| Removing, installing | ||
1 | Remove bottom bunk mattress and stowage boxes | ||
2 | Remove luggage net above bunk mattress | Only if a luggage net is installed. | |
3 | Remove left and right side wall paneling | ||
4 | Remove expanding anchor (6) | ||
5 | Remove rear wall paneling (1) | Fold rear wall paneling to front and disconnect connectors (2, 3, 4) from switch console and reading lamp. Installation: First position screws (5) only. Tighten only when installing bunk mattress. | |
6 | Unclip switch console (10), reading lamp insert (7), reading lamp lens (8) and cover grates (9, 11) from cutouts | Only when replacing rear wall paneling. | |
7 | Install in the reverse order |