ar6830w4750b

Removing and installing rear wall paneling

Type ar · topic 68.30 · version 0104 · 2004-05-06

Applies to: MODEL 375.1 with BODY 375.830 with CODE (F04) L-cab (long) MODEL 375.3 with BODY 375.810 with CODE (F04) L-cab (long) MODEL 375.4 with BODY 375.840 with CODE (F04) L-cab (long) MODEL 944 with BODY 944.899 with CODE (F04) L-cab (long) MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F04) L-cab (long) MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F04) L-cab (long)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 375 (models 1**, 3**, 4**, 810, 830, 840) · Series 940 (models 899) · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 375 (models 1**, 3**, 4**, 810, 830, 840) · Series 940 (models 899) · Series 944 · Series 950 (models 5**, 6**) · Series 952 (models 5**, 6**) · Series 953 (models 6**) · Series 954 (models 5**) · Series 970 · Series 972 · Series 974 · Series 975 · Series 976

AR68.30-W-4750B

Removing and installing rear wall paneling

15.9.97

MODEL 375.1 with BODY 375.830 with CODE (F04) L-cab (long)

MODEL 375.3 with BODY 375.810 with CODE (F04) L-cab (long)

MODEL 375.4 with BODY 375.840 with CODE (F04) L-cab (long)

MODEL 944 with BODY 944.899 with CODE (F04) L-cab (long)

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F04) L-cab (long)

MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F04) L-cab (long)

Removing and installing rear wall paneling

W68.30-0032-09

Illustrated on body 940.899

1 Rear wall paneling

2 Switch console connector

5 Screw

6 Spreading anchor

3 Switch console connector

4 Reading lamp connector

Removing and installing rear wall paneling

W68.30-0033-06

7 Reading lamp insert

8 Reading lamp lens

9 Cover grate

10 Switch console

11 Cover grate

Removing, installing

1

Remove bottom bunk mattress and stowage boxes

AR91.75-W-7700B

2

Remove luggage net above bunk mattress

Only if a luggage net is installed.

3

Remove left and right side wall paneling

AR68.30-W-1450B

4

Remove expanding anchor (6)

5

Remove rear wall paneling (1)

Fold rear wall paneling to front and disconnect connectors (2, 3, 4) from switch console and reading lamp.

Installation: First position screws (5) only. Tighten only when installing bunk mattress.

6

Unclip switch console (10), reading lamp insert (7), reading lamp lens (8) and cover grates (9, 11) from cutouts

Only when replacing rear wall paneling.

7

Install in the reverse order

Referenced documents