AR68.30-W-1450B | Remove/install side wall lining | 15.9.97 |
MODEL 375.1 with BODY 375.830 with CODE (F04) Cab L (long)
MODEL 375.3 with BODY 375.810 with CODE (F04) Cab L (long)
MODEL 375.4 with BODY 375.840 with CODE (F04) Cab L (long)
MODEL 944 with BODY 944.899 with CODE (F04) Cab L (long)
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899 with CODE (F04) Cab L (long)
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (F04) Cab L (long)
W68.30-0034-12
Shown on body 940.899
1 Side wall paneling
2 Coat hook
3 Screw
4 Plug
5 Cover
6 Screw
7 Grab handle
8 Cover
9 Door seal
| Removal/installation | ||
1 | Remove curtain rail | ||
2 | Remove side window | Only if installed. | |
3 | Remove stowage compartment on corresponding side | For bodies 375.830 and 375.810 the bunk can be left folded up at the rear wall. | |
On body 944.899 remove the lower bunk. | |||
4 | safety belt removal | For equipment specifications with suspension seat, the seat belt's retaining clip on the underside of the seat can be left in place. | |
5 | Remove coat hook (2) | ||
6 | Remove grab handle (7) | As of 10/99 the support rod is placed down into the wheelhouse paneling. | |
| |||
7 | Remove fender skirt | Only if installed. | |
8 | Remove door seal (9) from door cutout in area of B-pillar | ||
9 | Remove switch plate | On left side wall lining only when installed. | |
10 | Lift out side wall paneling (1) | Installation:Fold back foot mat. Insert side wall paneling into guide grooves in rear wall and roof paneling. | |
11 | Remove covers (5, 8) and plugs (4) from side wall lining (1) cutouts | Only when equipped with suspended seat and when side paneling is replaced. | |
12 | Install in the reverse order |
Retaining rod
Number | Designation | Body 375.810 | Body | Body | |
BA68.70-N-1001-01A | Screw for retaining rod on cab | Nm | 18 | 18 | 18 |
Retaining rod