S68.30-2509-06
1 Inner side paneling in cargo space
2 Mounting screws
3 Grab handle
4 D-pillar paneling
5 Spacers
| Removing, installing | ||
1 | Remove inner side paneling in cargo | ||
2 | Remove air ducts for rear air conditioning | Only with code HH7. | |
3 | Unscrew mounting screws (2) of | This mount consists of plastic screws with spreading clip mounts. | |
4 | Unscrew grab handle (3) | Pay attention to installation position of handle (3) and spacers (5). | |
5 | Unclip D-pillar paneling (4) | ||
6 | Disconnect electrical connector from pneumatic suspension switch | Only on right side of vehicle. Set vehicle to Service mode | |
See Operating Manual | |||
7 | Install in the reverse order |