AR83.50-S-4000A | Remove and install air ducts for rear air conditioning | 31.10.00 |
MODELS 638.1 /2
with CODE (H06) air conditioning
with CODE (HH7) air conditioning in rear
S83.50-4003-06
1 Inner paneling of load compartment at side
2 Center duct
3 Air nozzle
4 Blower switch
5 Plastic cap
6 Upward flow duct
7 Bolt
8 Rear AC housing
9 Rubber boot
10 Transverse duct
| Removing, installing | ||
1 | Remove inner paneling of load compartment at side (1) on left | ||
2 | Remove center duct (2) | Installation: Insert electric wiring harness. | |
Press the center duct (2), which has been clipped onto three brackets (arrow), downward. Disconnect connector for blower switch (4). | |||
If the center duct is replaced, remove air nozzles (3) and blower switch (4). | |||
3 | Remove plastic cap (5) on upward flow duct (6) | ||
4 | Unscrew bolts (7) on upward flow duct (6) | Installation: Bolts (7) on upward flow duct (6) may fall into the rear AC housing (8). | |
5 | Pull upward flow duct (6) out of rubber boot (9) and transverse duct (10) | Installation: Insert electric wiring harness. | |
6 | Remove transverse duct (10) out of roof paneling | Installation: Insert electric wiring harness. | |
Pull the transverse duct (10), which has been clipped onto two brackets (arrow), downward and to the front. | |||
7 | Pull rubber boot (9) out of rear AC housing (8) | ||
8 | Install in the reverse order |