P68.30-3864-09
1 | Rear shelf | 5 | Electrical line | |
2 | C-pillar paneling | 6 | Sheet metal clip | |
3 | Spacer | 7 | Bodywork | |
4 | Electrical connectors |
8 | Screw |
9 | Towing eye bracket |
10 | Catch |
P68.30-3865-12
Danger ! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Notes on sensor system for trunk lid opening/closing | ||
| Remove/install | ||
1 | Remove right and left C-pillar paneling (2) | ||
Belt end fittings must not be detached. | |||
2 | Remove spacers (3) | Clip remover | |
3 | Disconnect electrical connectors (4) | ||
4 | Remove electrical lines (5) from body | ||
5 | Unscrew bolt (8) from towing eye bracket (9) and remove towing eye bracket (9) | Installation: Hook towing eye bracket (9) into body (7) together with sheet metal clip (6) and clip in. | |
6 | Unlock catches (10) on rear shelf (1) and slightly push rear shelf (1) toward front | Installation: Ensure that arrests (10) are seated correctly. | |
7 | Remove rear shelf (1). | Helper required. | |
8 | Remove sheet metal clip (6) from body (7) | Installation: Screw sheet metal clip (6) to towing eye bracket (9) with bolt (8). | |
9 | Install in the reverse order |
452 589 01 63 00
Clip remover
Henviste dokumenter
- ah8061p000101a Oplysninger om HANDS-FREE ACCESS
- ar6830p4490clw
- as0000z001101a Fare for personskade pga. fastklemning eller knusning af fingre ved af-, påmontering og indstillingsarbejde på motorhjelm og bagklap, døre, dæksler og soltag.