Remove/install trim at C-pillar

AR68.30-P-4490CLW

Remove/install trim at C-pillar

13.11.15

Model

205.3

Shown on left side of vehicle

1

C-pillar paneling

2

Screw

3

Cover

4

Seat belt

 

Remove/install

1

Remove rear passenger compartment side trim panel

AR68.30-P-4780CLW

2

Unscrew bolt (2)

 Bolt, rear belt end fitting

*BA91.40-P-1005-01U

3

Unclip cover (3)

 Retaining clip remains in C-pillar paneling (1).

 Clip remover

*452589016300

4

Detach C-pillar paneling (1) from C-pillar, slightly tilt toward center of vehicle and then move out toward front


Carefully remove C-pillar paneling (1).
Otherwise roof paneling can be damaged.

 Installation: Insert cover (3) into retaining clips on C-pillar paneling (1).
Clip in C-pillar paneling (1) completely preassembled.
Ensure that C-pillar paneling (1) is seated correctly.

5

Guide seat belt (4) through C-pillar paneling (1)

6

Install in the reverse order

 Seat belts/emergency tensioning retractors

Number

Designation

Model 205.3

BA91.40-P-1005-01U

Bolt, rear belt end fitting

Nm

35