ar6830p4300m

Remove/install headliner

Type ar · emne 68.30 · version 0104 · 2004-10-21

Gælder for: Models 220.0 /1

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 220 (modeller 0**, 1**)

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.32 loftsbeklædning — Serie 220 (modeller 0**, 1**)

AR68.30-P-4300M

Remove/install headliner

19.2.98

Models 220.0 /1

Remove/install headliner

P68.30-2787-06

Illustrated on model 220.1 with code (414a) Electric glass sliding/pop-up roof

1 Roof paneling

2 Clamp

3 Electrical connector

4 Velcro fastener

Remove/install headliner

P68.30-2788-06

Illustrated on model 220.1 with code (414a) Electric glass sliding/pop-up roof

1 Roof paneling

5 Rail

6 Mounting rail

7 Sliding/pop-up roof frame guide

Remove/Install

1.1

Open sliding/pop-up roof panel

On vehicles with code (414a) Electric glass sliding/pop-up roof

2.1

Remove right front door

Model 220.0

AR72.10-P-0500M

3

Remove paneling from left and right A-pillar

AR68.30-P-4050M

4

Remove paneling from left and right B-pillar

AR68.30-P-4700M

5

Remove paneling from left and right C-pillar

AR68.30-P-4490M

6

Remove edge guard from door cutouts

7.1

Remove PTS warning display rear dome lamp

On vehicles with code (220a) Parktronic system (PTS)

First pull out left side from headliner (1)

8.1

Remove infrared interior monitoring transmitter/receiver

On vehicles with code (882b) Infrared interior monitoring (only with ATA)

AR80.50-P-9820F

9

Remove left and right dome lamp in rear

AR82.20-P-0113M

10

Remove rear and front handles

11

Remove sun visors

12

Remove front interior lights

13

Remove overhead control panel control module

AR82.20-P-1000M

14

Remove inside rearview mirror

AR68.40-P-0001M

15

Disconnect rain sensor connector

16.1

Remove rail (5) from sliding roof cutout upward (arrows)

On vehicles with code (414a) Electric glass sliding/pop-up roof

17

Remove driver seat

AR91.10-P-1000M

18

Remove rear shelf

AR68.30-P-4580M

19

Disconnect electrical connectors (3) on right below rear shelf

20

Loosen headliner (1) in rear area from Velcro strips (4)

21

Unhook headliner (1) from clips (1) in rear area (2)

22

Slightly pull headliner (1) down in area of windshield

23.1

Press headliner (1) with mounting rail toward front (arrows) out of sliding/pop-up roof frame guide (7)

On vehicles with code (414a) Electric glass sliding/pop-up roof

24

Completely move passenger seat downward and lay backrest down

25.1

Remove headliner (1) through passenger door

Model 220.0

25.2

Remove headliner (1) through rear door

Model 220.1

26.1

Prepare headliner (1) for installation.

Only when replacing headliner (1).

AR68.30-P-4305M

27

Install in the reverse order

28

Perform function check

Henviste dokumenter