ar6830d1306ts

Remove/install entrance paneling

Type ar · emne 68.30 · version 0101 · 2018-05-17

Gælder for: Model 907, 910

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 68 Indvendig udrustning › 68.30 Beklædninger, pynterammer — Serie 907 · Serie 910

EinPAS 37 Indvendigt udstyr › 37.45 Beklædning › 37.45.37 fodrumsbeklædning — Serie 907 · Serie 910

AR68.30-D-1306TS

Remove/install entrance paneling

02.05.2018

Model

907, 910

Remove/install entrance paneling

D68.30-2495-09

1

Entrance paneling

5

Screw

2

Bolts

6

B-pillar paneling

3

Door sill

7

Protective foil

4

Caps

8

Screw

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unscrew bolts (2).

2

Remove door sill (3).

3

Remove covers (4) from the door sill trim (1) with a suitable tool.

4

Remove bolts (5).

5

Pull B-pillar trim (6) in bottom area slightly to the side and remove screw (8).

Installation: Ensure that the sealing frame is seated correctly on the B-pillar trim (6).

6

Lift floor covering in the front area of the door sill trim (1) and remove door sill trim (1) upward.

Installation: Ensure that the sealing frame is seated correctly on the door sill trim (1).
Insert door sill trim (1) first in the rear area under the B-pillar trim (6).
To prevent movement of the protective foil (7) during installation of the door sill trim (1), fix it in place with two adhesive strips.

7

Install in the reverse order.

Henviste dokumenter