ar6110w5707a

Remove/install front engine tunnel section

Type ar · emne 61.10 · version 0103 · 2006-07-25

Gælder for: BODY 374.850 in MODEL 374.4 BODY 374.860 in MODEL 374.5 BODY 374.870 in MODEL 374.6 BODY 375.810 in MODEL 375.3 BODY 375.830 in MODEL 375.1 BODY 375.840 in MODEL 375.4 BODY 940.890 /899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 BODY 944.890 in MODEL 940.2 /3, 942.1 /3, 943.1 /3, 944.0 /2 BODY 944.899 in MODEL 944.0 /2 BODY 958.860 in MODEL 958.0 BODY 958.870 in MODEL 958.2 BODY 958.880 in MODEL 958.4 BODY 972.890 /899 in MODEL 970, 972, 974, 975, 976

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 3 Karrosseri › 61 Undervogn › 61.10 Rammebund — Serie 374 (modeller 4**, 5**, 6**, 850, 860, 870) · Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 2**, 3**, 890, 899) · Serie 942 (modeller 1**, 3**) · Serie 943 (modeller 1**, 3**) · Serie 944 (modeller 0**, 2**, 890, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**, 4**, 860, 870, 880) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 35 Karrosseri/ramme/monteringsdele › 35.32 undervogn › 35.32.35 bundgruppe/undervogsstel — Serie 374 (modeller 4**, 5**, 6**, 850, 860, 870) · Serie 375 (modeller 1**, 3**, 4**, 810, 830, 840) · Serie 940 (modeller 2**, 3**, 890, 899) · Serie 942 (modeller 1**, 3**) · Serie 943 (modeller 1**, 3**) · Serie 944 (modeller 0**, 2**, 890, 899) · Serie 950 (modeller 5**, 6**) · Serie 952 (modeller 5**, 6**) · Serie 953 (modeller 6**) · Serie 954 (modeller 5**) · Serie 958 (modeller 0**, 2**, 4**, 860, 870, 880) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

AR61.10-W-5707A

Remove/install front engine tunnel section

25.1.06

BODY 374.850 in MODEL 374.4

BODY 374.860 in MODEL 374.5

BODY 374.870 in MODEL 374.6

BODY 375.810 in MODEL 375.3

BODY 375.830 in MODEL 375.1

BODY 375.840 in MODEL 375.4

BODY 940.890 /899 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5

BODY 944.890 in MODEL 940.2 /3, 942.1 /3, 943.1 /3, 944.0 /2

BODY 944.899 in MODEL 944.0 /2

BODY 958.860 in MODEL 958.0

BODY 958.870 in MODEL 958.2

BODY 958.880 in MODEL 958.4

BODY 972.890 /899 in MODEL 970, 972, 974, 975, 976

Remove/install front engine tunnel section

W61.10-1142-06

1 Front engine tunnel section

Remove

Danger!

Risk of death caused by high voltage used for arc welding. Risk of explosion caused by welding in the area of highly inflammable materials. Injury hazard from welding spatter and UV-light while welding. Risk of poisoning caused by inhaling welding vapors.

Use insulating subsurfaces, protective clothing, protective goggles and protective mask. Remove highly inflammable materials from the danger zone. Use evacuation system.

AS00.00-Z-0007-01A

Measures for preventing damage to vehicles or components when performing arc welding work

AH00.00-N-0005-01A

General information on repairs to body

AH60.00-N-0001-01A

General notes on welding

AH60.00-N-0005-01A

1

Remove detachable parts in area to be repaired

2

Cover all detachable body components remaining in vehicle (area to be repaired)

3

Set up straightening bench with module members and straightening bracket set

*WE58.40-Z-1001-01E

Observe set-up plans included with straightening bracket set CC 7970.

*WE58.40-Z-1005-01C

4

Set cab onto straightening bench and fasten to straightening bracket set

5

Remove firewall

AR62.25-W-5753-01A

6

Separate front engine tunnel section

AR61.10-W-5707-01A

Install

7

Prepare engine tunnel section for installation

AR61.10-W-5707-02A

Weld in bolt with stud welder

*WE58.40-Z-1004-02A

8

Install front engine tunnel section

AR61.10-W-5707-03A

9

Prepare engine tunnel for installation

AR61.10-W-5706-02A

10

Install firewall inner section

AR62.25-W-5753-02A

11

Install firewall outer section

AR62.25-W-1220-05A

12

Install inner A pillar and weld in

AR63.20-W-1150-03A

13

Install handle reinforcement

AR63.20-W-1101-04A

14

Install A-pillar outer section

AR63.20-W-1102-03A

15

Supplement seals with MB body sealant

16

Supplement underbody protection with MB permanent underfloor protection agent.

17

Paint area repaired and adjacent surfaces

See Paintwork Manual

18

Supplement MB cavity preservation

19

Reinstall all detachable body components removed

Workshop equipment

WE58.40-Z-1005-01C

Celette straightening bracket set, CC 7970

WE58.40-Z-1001-01E

Celette straightening bench

WE58.40-Z-1004-02A

Stud welder

Henviste dokumenter