Remove/install platform inlay

AR60.30-S-0021P

13.08.2018

Model	470, 471
	with code Y1O (Load bed trim)

1	Tie-down eye
2	Bolts

S60.30-0225-05

3	Cap
4	Screw

S60.30-0226-06

Shown with code Y1W (Load bed anchoring rails)

7	Platform inlay
9	End caps (with code Y1W (Load bed anchoring rails))
10	Screws (with code Y1W (Load bed anchoring rails))
11	Upper sections (with code Y1W (Load bed anchoring rails))
12	Upper sections (with code Y1W (Load bed anchoring rails))

S60.30-0247-06

5	Seal
6	Seal
7	Platform inlay

S60.30-0227-12

7	Platform inlay

S60.30-0228-11

S60.30-0283-09

8

Vapor barriers

S60.30-0188-06

Shown without code Y1W (Load bed anchoring rails)

21	Butyl cords

S60.30-0196-06

Picture no., etc.	Work notes
	Remove/install platform roller cover	Model 470 with code Y1U (Roll cover) Model 470 with code Y1X (Roll cover black, anodized)	AR60.30-S-0013P
	Remove/install platform cover	Models 470, 471 with code Y1P (Hard cover)	AR60.30-S-0025P
	Remove/install platform cover and roll bar	Model 470, 471 with code Y1P (hardcover) with code Y1Q (roll bar (styling bar) polished) Model 470, 471 with code Y1P (Hardcover) with code Y1R (roll bar (styling bar) black)	AR60.30-S-0026P
	Remove/install hardtop	Model 470, 471 with code Y1D (hardtop) Model 470, 471 with code Y1E (hardtop with roof railing)	AR60.30-S-0008P
	Remove/install roll bar	Model 470, 471 with code Y1Q (roll bar (styling bar) polished) Model 470, 471 with code Y1R (roll bar (styling bar) black)	AR60.30-S-0028P
	Remove/install platform tarp	Models 470, 471 with code Y1T (Soft cover)	AR60.30-S-0022P
	Remove/install stowage box	Models 470, 471 with code Y1K (Stowage box)	AR60.30-S-0003P
	Remove/install platform partitioning grille	Models 470, 471 with code Y1L (Cargo area separation system)	AR60.30-S-0004P
	Remove/install tie-down rails on platform	Models 470, 471 with code VV2 (Cargo retainer rail system)	AR60.30-S-0002P
	Remove/install rail for assembly of platform cover	Models 470, 471 with code Y1P (Hard cover)	AR60.30-S-0025-01P
	Remove/install rail for assembly of roll bar	Model 470, 471 with code Y1P (hardcover) with code Y1Q (roll bar (styling bar) polished) Model 470, 471 with code Y1P (Hardcover) with code Y1R (roll bar (styling bar) black)	AR60.30-S-0026-01P
1	Tie-down eyes	Models 470, 471 except code VV2 (Cargo retainer rail system)
2	Bolts	Models 470, 471 except code VV2 (Cargo retainer rail system)
		 Bolt, tie-down eye to dropside	*BA60.30-N-1040-01P
3	Caps
4	Bolts	 Bolt, mounting plate to platform inlay	*BA60.30-N-1030-01P
5	Seal	 Dispose of seal (5). A new seal (5) is always installed.
		 Installation: Use a  roller.
		 Roller	*168589056300
6	Seal	 Dispose of seal (6). A new seal (6) is always installed.
		 Installation: Use a  roller.
		 Roller	*168589056300
7	Platform inlay	 To do this, press the opening of the platform inlay (7) upward in the direction of the arrow. Aid of 2 helpers required.
8	Vapor barriers	Cleaner	*BR00.45-Z-1025-04A
		Tape primer/bonding agent 94	*BR00.45-Z-1184-02A
9	End caps	Model 470, 471 with code Y1O (Load bed trim) with code Y1W (Load bed anchoring rails)
10	Bolts	Model 470, 471 with code Y1O (Load bed trim) with code Y1W (Load bed anchoring rails)
		 Bolt, upper part of tie-down rail to lower part of tie-down rail	*BA60.30-N-1014-01P
11	Front upper sections	Model 470, 471 with code Y1O (Load bed trim) with code Y1W (Load bed anchoring rails)
12	Rear upper sections	Model 470, 471 with code Y1O (Load bed trim) with code Y1W (Load bed anchoring rails)
21	Butyl cords	Model 470, 471 with code Y1O (Load bed trim) with code Y1W (Load bed anchoring rails)
		 Remove adhesive residues and clean bonding surface. Cut butyl cords (21) to internal size of platform. adjust the length of the affected butyl cords (21). Purchase required butyl round cords (black), Ø 6 mm from open market.
		 Approx. 9 m of butyl cord are required.
		Cleaner	*BR00.45-Z-1025-04A
A	Range	 Remove adhesive residues and clean bonding surface.
		Cleaner	*BR00.45-Z-1025-04A
B	Range	 Remove adhesive residues and clean bonding surface.
		Cleaner	*BR00.45-Z-1025-04A

 Platform

Number	Designation		Model 470, 471
BA60.30-N-1014-01P	Bolt, upper part of tie-down rail to lower part of tie-down rail	Nm	9

 Platform

Number	Designation		Model 470, 471
BA60.30-N-1030-01P	Bolt, mounting plate to platform inlay	Nm	2

 Platform

Number	Designation		Model 470, 471
BA60.30-N-1040-01P	Bolt, tie-down eye to dropside	Nm	23

168 589 05 63 00

Roller

Repair materials

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71
BR00.45-Z-1184-02A	Tape primer/bonding agent 94	3MDeutschland GmbH Carl-Schurz-Strasse 1 41453 Neuss Germany Tel. +49 2131 14-0 Fax +49 2131 14-2649 http://www.3m.com

Henviste dokumenter