ar5425p2803p

Remove/install cruise control switch

Type ar · emne 54.25 · version 0200 · 2006-06-14

Gælder for: MODEL 203 up to 23.4.04 with CODE (440) Cruise control

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 54 El-system, udrustning og instrumenter › 54.25 Kontakter — Serie 203

EinPAS 28 Komfort-/førerassistancesystem › 28.25 Hastighedsregulering › 28.25.12 Sensor/kontakt/ledningssæt — Serie 203

AR54.25-P-2803P

Remove/install cruise control switch

9.6.06

MODEL 203 up to 23.4.04 with CODE (440) Cruise control

Remove/install cruise control switch

P54.25-2360-12

Illustrated on Model 203.0

1 Bolt

2 Jacket tube cover

S40 CC [TPM] switch

Modification notes

24.5.06

"Disconnect/connect ground line on battery" removed

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Notes on performing repair, body work and welding on vehicles with airbags and ETR units

Model 169, 171, 199, 203, 209, 211, 215, 219, 220, 230, 240

Model 463.243/244/245/246/247/248/

249/250/254/270/271/309/322/323/

332/333

AH91.00-P-0002-01M

1

Remove transmitter key from electronic ignition switch control unit

2

Remove steering wheel

AR46.10-P-0100P

3

Remove clock spring contact

up to 30.6.02

AR46.10-P-0200P

As of 1.7.02 up to 23.4.04

AR46.10-P-0200Q

4

Remove cover below instrument panel (left)

AR68.10-P-1500P

5

Detach coupling of CC [TPM] switch (S40) from EIS [EZS] control unit (N73)

6

Unscrew bolt (1).

7

Take CC switch (S40) out of steering column cover (2)

8

Install in the reverse order

Henviste dokumenter