Remove/install combination switch · ar5425p2800p · Mercedes-Benz WIS

AR54.25-P-2800P

Remove/install combination switch

9.6.06

MODEL 203 up to 23.4.04

P54.25-2357-06

Shown on model 203.0

31 Bolts

32 Clutches

33 Jacket tube cover

S4 Combination switch

S4x1 Combination switch connector

S40 CC [TPM] switch

Modification notes

24.5.06

"Disconnect/connect ground line on battery" removed

 	Remove/install
 Danger!	Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.	Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.	AS91.00-Z-0001-01A
	Notes on performing repair, body work and welding on vehicles with airbags and ETR units	Model 169, 171, 199, 203, 209, 211, 215, 219, 220, 230, 240 Model 463.243/244/245/246/247/248/ 249/250/254/270/271/309/322/ 323/332/333	AH91.00-P-0002-01M
1	Remove transmitter key from electronic ignition switch control unit
2	Remove steering wheel	 Move front wheels into center position.	AR46.10-P-0100P
3	Remove clock spring contact	up to 30.6.02	AR46.10-P-0200P
		As of 1.7.02 up to 23.4.04	AR46.10-P-0200Q
4	Remove bolts (31)
5.1	Remove cruise control switch (S40) from jacket tube cover (33)	Only with cruise control code 440
		 Put TPM switch (S40) to one side.
6	Unclip couplings (32) and pull out of the combination switch housing	 Unlock in direction of arrow and pull out towards steering wheel.
7	Remove combination switch (S4) from jacket tube cover (33)
8	Disconnect combination switch plug connector (S4x1)
9	Install in the reverse order

ah9100p000201m Oplysninger om udførelse af reparations-, karrosseri- og svejsearbejde på køretøjer med airbag- eller selestrammerenheder
ar4610p0100p
ar4610p0100p
ar4610p0200p
ar4610p0200q
as9100z000101a Fare for personskade ved kontrol- og reparationsarbejde på airbag- eller selestrammerenheder