ar4640b0100b
Remove/install drag link
Type ar · emne 46.40 · version 0101 · 2020-03-31
Gælder for: Steering gear 766 in model 384.065/078/201/223 Steering gear 766.584 in model 368.0/1
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 46 Styretøj › 46.40 Styrestænger — Serie 368 (modeller 0**, 1**) · Serie 384 (modeller 065, 078, 201, 223)
EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.43 svingarm/styrestang/sporstang/dæmper — Serie 368 (modeller 0**, 1**) · Serie 384 (modeller 065, 078, 201, 223)
Gælder også for motorer/gearkasser: 766 ***, 766 584
AR46.40-B-0100B
| Remove/install drag link
| 11.03.2020
|
Steering gear
| 766 in model 384.065/078/201/223
|
Steering gear
| 766.584 in model 368.0/1
|
1
| Pitman arm
|
2
| Safety nut
|
3
| Drag link
|
| Remove
|
|
|
1
| Loosen the safety nut (2) in the pitman arm (1) and in the front axle steering lever
| Do not remove the nut in this operation as the drag link will come loose together with the puller, and it may cause injuries.
|
|
2
| Loosen the drag link (3) in the pitman arm (1) and in the steering lever
| The drag link suddenly comes loose.
|
|
|
|
| Puller
| *601589043300
|
3
| Remove the safety nut (2) and the drag link (3)
|
|
|
| Install
|
|
|
4
| Loosen the drag link (3) in the pitman arm (1) and in the front axle steering lever
| If a new drag link is installed, check and adjust the steering central position in the steering gear, if required.
|
|
5
| Tighten the safety nut (2)
| .Steering bar to the pitman arm
| *BA46.40-B-1001-06A
|
Number
| Designation
|
|
| Type 368.0/1, 382.1, 384.0/2/3, 634.0, 685.203, 979.2
|
BA46.40-B-1001-06A
| Steering bar to the pitman arm
| M18x1.5
| Nm
| 170
|
|
|
| M20x1.5
| Nm
| 225
|
|
|
| M24x1.5
| Nm
| 280
|
