Remove/install steering gear

AR46.20-D-0500TSF

Remove/install steering gear

19.07.2019

Model

910 with engine 651

1

Steering gear

2

Nut

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Notes on repair work on suspension components

AH00.00-P-0100-01A

 

Remove/install

1

Remove front axle carrier.

AR33.10-D-0001TSF

2

Place front axle carrier onto workbench.

 A helper is required.

3

Remove steering gear (1) from front axle carrier.

 To do so, remove bolts of nuts (2).

 Screw, steering gear to front axle carrier/integral carrier

*BA46.20-N-1001-01TS

4

Install in the reverse order.

5

Teach-in steering gear (1) using vehicle diagnosis system.

If the steering gear (1) was replaced.



Connect/disconnect diagnostic unit

AD00.00-D-2000-06TS

 Steering gear

Number

Designation

Model 910

BA46.20-N-1001-01TS

Screw, steering gear to front axle carrier/integral carrier

Stage 1

Nm

150

Stage 2

°

120