ar4610s8000p

Remove/install steering coupling

Type ar · emne 46.10 · version 0101 · 2018-12-10

Gælder for: Model 470, 471

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.10 Rat, kapperør, styrespindel, ratlås — Serie 470 · Serie 471

EinPAS 22 Styretøj › 22.15 Servostyring › 22.15.40 rat/ratstamme/styrerør/ratlås — Serie 470 · Serie 471

AR46.10-S-8000P

Remove/install steering coupling

26.11.2018

Model

470, 471

Remove/install steering coupling

Shown on model 470 with code ZG3 (Engageable all-wheel drive with transmission ratio)

1

Screw

2

Steering coupling

3

Steering gear

S46.10-4557-06

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Remove/install

1

Remove steering shaft from steering coupling (2).

AR46.10-S-7300P

2

Remove front wheel at driver's side.

AR40.10-S-1100P

3

Remove screw/bolt (1).

Installation: Replace bolt (1).

Screw/bolt, steering coupling to steering gear

*BA46.10-N-1001-01P

4

Remove steering coupling (2).

To do so, remove steering coupling (2) from steering gear (3).

Installation: The markings(arrows) must line up.

5

Install in the reverse order.

Steering shaft

Number

Designation

Model 470, 471

BA46.10-N-1001-01P

Screw/bolt, steering coupling to steering gear

Nm

28

Henviste dokumenter