ar4610p0200b

Removing and installing contact spiral

Type ar · emne 46.10 · version 0103 · 2004-10-20

Gælder for: MODEL 170, 208, 210 as of 1.6.99

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 46 Styretøj › 46.10 Rat, kapperør, styrespindel, ratlås — Serie 170 · Serie 208 · Serie 210

EinPAS 25 bilens ledningsnet/netværk/multifunktion › 25.15 netværk/multifunktion › 25.15.18 kontakt/kontaktgruppe/betjeningsfelt — Serie 170 · Serie 208 · Serie 210

AR46.10-P-0200B

Removing and installing contact spiral

10.1.97

MODEL 170, 208,
210 as of 1.6.99

Removing and installing contact spiral
Removing and installing contact spiral
Removing and installing contact spiral

P46.10-0397-01

P46.10-0398-01

P46.10-0399-01

Model 208 shown

Removal, installation

1

Remove steering wheel

Front wheels in straightahead position

Model 170, 208.

AR46.10-P-0100C

Model 210.

AR46.10-P-0100B

2

Only unscrew fixing bolts (32h) until the contact spiral (A45) can be removed.

The fixing bolts are used as an anti-rotation device or assembly aid at the same time.

3

Carefully remove contact spiral (A45) from jacket tube

Installation: Push on contact spiral (A45) up to the stop; the recess must align with the fixing lug (arrows) and the connector (a, b).

If the contact spiral was twisted, e.g. when the steering coupling was removed

Adjust center position of contact spiral.

AR46.10-P-0200-01A

Checking

4

Check contact spiral (A45) for damage

Visual inspection.

The upper (32f) and lower sections (32g) of the contact spiral are clipped together and can only be separated due to the effect of excess forces or defective assembly. If this is the case, wind the contact spiral up carefully and assemble with care, not pinching or kinking the contact spiral (32e).

Do not use oil or grease!

5

Install in reverse order

Henviste dokumenter