ar4305d1320e

Remove/install vacuum pump

Type ar · emne 43.05 · version 0105 · 2010-01-28

Gælder for: MODEL 901.6, 902.6, 903.6, 904.6 with ENGINES 611.981 /987 MODEL 902.6, 903.6, 904.6, 905.6 with ENGINE 612.981 MODEL 690.6 with ENGINE 611.983

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 43 Bremsepneumatik og hjælpebremser › 43.05 Vakuumpumpe — Serie 611 (modeller 981, 983, 987) · Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

EinPAS 21 bremser/vakuumsystem/trykluftsystem › 21.15 driftsbremse/vakuumsystem › 21.15.50 vakuumpumpe/trykluftbeholder — Serie 611 (modeller 981, 983, 987) · Serie 690 (modeller 6**) · Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)

Gælder også for motorer/gearkasser: 612 981

AR43.05-D-1320E

Remove/install vacuum pump

13.1.10

MODEL 901.6, 902.6, 903.6, 904.6 with ENGINES 611.981 /987

MODEL 902.6, 903.6, 904.6, 905.6 with ENGINE 612.981

MODEL 690.6 with ENGINE 611.983

Remove/install vacuum pump

D43.05-1101-05

1 Vacuum pump

2 Vacuum line

3 Sealing ring

4 Sealing ring

5 Exhaust camshaft

6 Screw

Remove/install

1

Disconnect vacuum line (2) from vacuum pump (1)

Compress catches (arrows) and pull off vacuum line (2)

2

Detach bracket of oil dipstick guide tube on cylinder head

3

Unscrew bolts (6) from vacuum pump (1)

*BA43.05-N-1005-01B

4

Pull off vacuum pump (1) towards the front

Installation: Insert the driver on the rear of the pump into the driver on the camshaft.

Replace sealing rings (3, 4) and clean sealing surface

5

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Inspect for oil leaks

Allow engine to run until warm, then turn off engine and check for leaks

Vacuum pump

Number

Designation

Model
690.6
with engine
611.983

Model
901.6, 902.6, 903.6, 904.6
with engine 611.981/987

Model
902.6, 903.6, 904.6 and 905.6 with engine 612.981

BA43.05-N-1005-01B

Bolt, vacuum pump to cylinder head

Nm

14

14

14

Henviste dokumenter