Removing and installing ABS measuring ring

Type ar · emne 42.30 · version 0103 · 2004-05-06

Gælder for: MODELS 375.1, 970, 972, 974, 975, 976 with FRONT AXLE 730.024 MODEL 375.3 with REAR AXLE 749.732 /733

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 42 Bremsehydraulik og -mekanik › 42.30 Antiblokeringssystem (ABS) — Serie 375 (modeller 1**, 3**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

EinPAS 26 Aktive sikkerhedssystemer › 26.20 Bremse-/traktionsregulering › 26.20.12 Sensor/kontakt/ledningssæt — Serie 375 (modeller 1**, 3**) · Serie 970 · Serie 972 · Serie 974 · Serie 975 · Serie 976

Gælder også for motorer/gearkasser: 730 024, 749 732, 749 733

AR42.30-W-0160D

Removing and installing ABS measuring ring

11.9.97

MODELS 375.1, 970, 972, 974, 975, 976 with FRONT AXLE 730.024

MODEL 375.3 with REAR AXLE 749.732 /733

W42.30-0025-01

1 ABS measuring ring

2  Drift

 	Removing, installing
1.1	Remove front wheel hub	FA 730.024	AR33.20-W-0310C
1.2	Remove wheel hub on trailing axle	RA 749.732	AR35.50-W-0003C
		RA 749.733	AR35.50-W-0003D
2	Remove ABS measuring ring (1)	 Installation: Install ABS measuring ring flush with hub end face.	*739589041500
3	Install in the reverse order

739 589 04 15 00

Drift