Replace propeller shaft center support bearing

AR41.40-P-0002LF

09.10.2014

MODEL	217
MODEL	222

Shown on model 222 with 2-piece propeller shaft

1	Propeller shaft intermediate bearing
2a	Insulation
2b	Insulation
3	Reinforcement
4	Boot

P41.40-2003-11

 	Remove/install
1	Remove propeller shaft		AR41.10-P-0050LF
2	Separate propeller shaft at the appropriate slide connection
	Long-life grease (NLGI grade 2)		BB00.40-P-0266-02A
		Connect sections of propeller shaft	AR41.10-P-0050-05LF
		 Installation: Assemble the propeller shaft in the correct position.
		 Vehicles with 3-piece propeller shaft have 2 propeller shaft center support bearings (1).
3	Detach propeller shaft center support bearing (1) from joint fork.		AR41.40-P-0002-02LF
		 Removal and installation tool	*203589014300
		 Drift	*126589031500
		 Puller arms	*129589003400
		 Puller, two-arm	*000589883300
4	Remove ball bearing of rear propeller shaft center support bearing (1)	MODEL 222.9	AR41.40-P-0002-03LF
		 The ball bearing of the propeller shaft center support bearing (1) can only be replaced on the rear propeller shaft center support bearing (1).
		 Removal and installation tool	*116589094300
	Check
5	Check insulation (2a)	In event of damage and loose mounting.
		Replace insulation (2a):
		
		Clean contact surface of insulation (2a) on propeller shaft center support bearing (1). Glue insulation (2a) onto propeller shaft center support bearing (1).
		 The contact surface must be clean, dry and free of grease and dust.
		Cleaner	*BR00.45-Z-1025-04A
6	Check insulation (2b)	 Check for any damage and correct seating.
7	Check boot (4)	 Check for any damage and correct seating.
8	Install in the reverse order

116 589 09 43 00

Removal and installation tool

126 589 03 15 00

Drift

000 589 88 33 00

Puller, two-arm

203 589 01 43 00

Removal and installation tool

129 589 00 34 00

Puller arms

Repair materials

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71