Carrying out distance and comparison measurements on front axle · ar4030d040201h · Mercedes-Benz WIS

AR40.30-D-0402-01H

Carrying out distance and comparison measurements on front axle

Test values for distance and comparison measurement on front axle

Number	Designation				Model 900	Model 906


BE40.30-N-1001-06A	Test value	V1	Effective dimension	mm	1836 (2)	1836 (2)
			max. difference left - right	mm	4	4
		V2	Effective dimension	mm	1653 (2)	1653 (2)
			max. difference left - right	mm	4	4
		V3	Effective dimension	mm	1370 (2)	1370 (2)
			max. difference left - right	mm	3	3
			See picture		AR40.30-D-0402HB	AR40.30-D-0402HA
					AR40.30-D-0402HD	AR40.30-D-0402HB
					-	AR40.30-D-0402HC
					-	AR40.30-D-0402HD

Carrying out distance and comparison measurements on front axle

D40.30-1102-08

D40.30-1117-11

 The beam trammel for measuring of the vehicle frame is made up of the following tools:

- Contact arm (01)

- Measuring cone (02)

- Measuring tips (400 mm) (03)

- Beam trammel (05)

Beam trammel

gotis://K_60-65_01.0

D40.30-1110-01

1 Measure reference dimension "V1" from check point (K) to check point (k1) on longitudinal member.

 To do so, use contact arm (01) for check point (K). Measure to left and right side in each case. If no screw is inserted in the weld nut to mount the contact arm (01), first insert, from the interior, a correctly sized screw (M1030) into the weld nut.

D40.30-1109-01

D40.30-1108-01

2 Measure reference dimension "V2" from check point (k1) on longitudinal member to check point (k2) on longitudinal member located opposite.

Measure on left and right side in each case.

D40.30-1111-01

D40.30-1109-01

3 Measure reference dimension "V3" from check point (k1) on longitudinal member to check point (k2) on longitudinal member.

Measure on left and right side in each case.

D40.30-1112-01