Remove/install cover of rear axle differential · ar3531p0555mnc · Mercedes-Benz WIS

AR35.31-P-0555MNC

Remove/install cover of rear axle differential

23.07.2020

Transmission	725.0 in model 213 (except 213.088/089/288/289)
	with code 700 (Vehicle production location China)

Remove/install cover of rear axle differential

3	Bolts
4	Rear axle carrier
5	Screw
50	Rear axle gear
52	End cover
52d	Seal
52s	Bolts

P35.31-2318-06

 Warning	Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
 Caution	Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil	Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles.	AS00.40-Z-0001-01A
Topical note	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
 	Remove/install
1	Secure vehicle on vehicle lift.		AR00.60-P-0100CW
2	Drain oil from rear axle differential (50).		AR35.31-P-0520-06CWC
		 Drain screw to rear axle differential	*BA35.31-P-1003-02H
		Loctite 272 sealing adhesive	*BR00.45-Z-1102-02A
		Loctite 7063 (400 ml) cleaning spray	*BR00.45-Z-1046-04A
3	Remove propeller shaft from rear axle differential (50).		AR41.10-P-0050LW
4	Secure rear axle differential (50) against falling down using tensioning strap on rear axle carrier (4).	 Do not loosen screws (3) of rear axle differential mounting at rear before the rear axle differential (50) is secured! Otherwise the rear axle differential mounting is destroyed.
5	Remove screws (3) of rear axle differential mounting at rear.	 Bolt, rear axle differential to rear transverse bridge	*BA35.10-P-1006-01H
6	Support rear axle differential (50) with major assembly mount and support plate.
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
7	Release tensioning strap of rear axle differential (50) on rear axle carrier (4).
8	Secure rear axle differential (50) against falling down using tensioning strap support plate.
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
9	Remove screw (5) of front rear axle differential mounting.	 Rear axle differential to front adapter	*BA35.10-P-1005-01H
10	Lower rear axle differential (50).
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
11	Remove screws (52s) and remove end cover (52).	 Do not damage sealing surfaces of rear axle differential (50) and of end cover (52). Otherwise, leaks can occur at the rear axle differential (50).
		 Bolt, end cover to rear axle differential	*BA35.31-P-1001-02H
12	Remove seal (52d).	 Installation: Replace seal (52d).
13	Clean sealing surfaces on end cover (52) and on rear axle differential (50).		AR01.00-P-0050-01A
		Loctite 7063 (400 ml) cleaning spray	*BR00.45-Z-1046-04A
		Loctite 7200	*BR00.45-Z-1038-04A
14	Install in the reverse order.
	Check
15	Check oil level in rear axle differential(50) and correct if necessary.		AR35.31-P-0520-08OLC
		 Oil filler screw of rear axle differential	*BA35.31-P-1002-02H
		 Filling capacity	*BF35.31-P-1002-02C
		Loctite 7063 (400 ml) cleaning spray	*BR00.45-Z-1046-04A
		Sealant, Omnifit 100H (50 g)	*BR00.45-Z-1061-01A
16	Check rear axle differential(50) for leak tightness.

 Rear axle carrier

Number	Designation				Model 213
BA35.10-P-1005-01H	Rear axle differential to front adapter	Rear axle differential (steel)		Nm	65
		Rear axle differential (aluminum)	Stage 1	Nm	40
			Stage 2	°	45

 Rear axle carrier

Number	Designation		Model 213
BA35.10-P-1006-01H	Bolt, rear axle differential to rear transverse bridge	Nm	170

 Rear axle differential housing

Number	Designation			Model 213
BA35.31-P-1001-02H	Bolt, end cover to rear axle differential	Stage 1	Nm	30
		Stage 2	°	45

 Rear axle differential housing

Number	Designation		Model 213
BA35.31-P-1002-02H	Oil filler screw of rear axle differential	Nm	50

 Rear axle differential housing

Number	Designation		Model 213
BA35.31-P-1003-02H	Drain screw to rear axle differential	Nm	50

 Rear axle gear

Number	Designation			Model 213 (except 213.088/089/288/289) with code 700 (Vehicle production location China)
BF35.31-P-1002-02C	Filling capacity	Rear axle differential 200 C	Liter	1,0
		Overview of specified transmission oils		BB00.40-P-0231-01A
		References, approved axle gear oils		BB00.40-P-0235A

Repair materials

Number	Designation	Order number
BR00.45-Z-1038-04A	Loctite 7200	Henkel AG & Co. KGaA http://www.loctite.de
BR00.45-Z-1046-04A	Loctite 7063 (400 ml) cleaning spray	A 001 986 71 71 09
BR00.45-Z-1061-01A	Sealant, Omnifit 100H (50 g)	A 002 989 23 71
BR00.45-Z-1102-02A	Loctite 272 sealing adhesive	Henkel AG & Co. KGaA http://www.loctite.de

Henviste dokumenter

ah0000p002001a Oplysninger om skrueforbindelser, som er fremstillet efter den drejevinkelstyrede tilspændingsmetode
ar0060p0100cw
ar0100p005001a
ar3531p052006cwc
ar3531p052008olc
ar4110p0050lw
ar4110p0050lw
ar4110p0050lwx
ar4110p0050lwx
as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
as0040z000101a Fare for personskade på hud og øjne ved håndtering af gearolie. Sundhedsfare ved indtagelse af gearolie
ws0100p0092b
ws2600p3309b