Check oil level at interior temperature only and not when the rear axle differential is at operating temperature. Otherwise, when the rear axle differential is at operating temperature, required oil could escape. Cleaning
1
Clean area around oil filler screw (50 g).
2
Remove and replace oil filler screw (50g).
Check
3
Check and correct oil level. Model 213 (except 213.088/089/288/289) except code 700 (Technology Local Content China) Model 213 (except 213.088/089/288/289) with code 700 (Technology Local Content China) Model 238
With the correct oil level the oil reaches up to the bottom edge of the threaded hole. If necessary, add oil or drain off oil until the oil only drips out of the threaded hole.
Cleaning
4
New oil filler screw (50g) and threaded hole in rear axle differential with cleaning spray .
The oil filler screw (50g) and tapped hole must be free from oil and grease.
P35.31-2295-10
5
Apply one drop of to lower third of thread of oil filler screw (50g).
6
Screw oil filler screw (50g) immediately into the rear axle differential and tighten to the specified torque .
P35.31-2250-01
Henviste dokumenter
as0040z000101a Fare for personskade på hud og øjne ved håndtering af gearolie. Sundhedsfare ved
indtagelse af gearolie