ar3530p7351g

Disassemble/assemble rear axle shaft

Type ar · emne 35.30 · version 0207 · 2020-03-12

Gælder for: Model 460 with rear axle 741 with drum brakes on the rear axle Model 461 with rear axle 741 (except 741.171/52/53) with drum brakes on the rear axle Model 463 with rear axle 741 (except 741.52/53) with drum brakes on the rear axle

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 35 Bagaksel › 35.30 Drev, drivaksler — Serie 460 · Serie 461 · Serie 463

EinPAS 17 Drivstreng/aksel › 17.51 Bagaksel › 17.51.51 Aksel/drivaksel — Serie 460 · Serie 461 · Serie 463

Gælder også for motorer/gearkasser: 741 ***, 741 11*, 741 110, 741 114, 741 115, 741 116, 741 117, 741 118, 741 119, 741 12*, 741 120, 741 121, 741 122, 741 123, 741 124, 741 125, 741 126, 741 127, 741 128, 741 129, 741 13*, 741 130, 741 131, 741 14*, 741 140, 741 141, 741 142, 741 143, 741 144, 741 145, 741 17*, 741 40*, 741 400, 741 401, 741 404, 741 405, 741 406, 741 407, 741 408, 741 409, 741 41*, 741 411, 741 412, 741 413, 741 414, 741 415, 741 416, 741 417, 741 419, 741 42*, 741 420, 741 421, 741 422, 741 423, 741 428, 741 429, 741 43*, 741 436, 741 437, 741 438, 741 439, 741 45*, 741 453, 741 454, 741 455, 741 456, 741 46*, 741 461, 741 50*, 741 501, 741 502, 741 503, 741 504, 741 505, 741 506, 741 507, 741 508, 741 509, 741 51*, 741 510, 741 512, 741 513, 741 514, 741 515, 741 516, 741 517, 741 518, 741 519, 741 54*, 741 540, 741 55*, 741 550, 741 559, 741 56*, 741 560, 741 57*, 741 570, 741 58*, 741 580, 741 61*, 741 610, 741 611, 741 612, 741 613, 741 614, 741 615, 741 616, 741 617, 741 618, 741 619, 741 62*, 741 620, 741 621, 741 623, 741 63*, 741 630, 741 631, 741 632, 741 633, 741 634, 741 635, 741 636, 741 637, 741 65*, 741 650, 741 68*, 741 680, 741 69*, 741 690, 741 691, 741 692, 741 71*, 741 710, 741 91*, 741 910, 741 911, 741 912, 741 913, 741 914, 741 915, 741 916, 741 917, 741 918, 741 93*, 741 930, 741 931, 741 934, 741 935, 741 936, 741 937, 741 95*, 741 950, 741 951, 741 98*, 741 980, 741 99*, 741 990

AR35.30-P-7351G

Disassemble/assemble rear axle shaft

13.12.2019

Model

460 with rear axle 741

with drum brakes on the rear axle

Model

461 with rear axle 741 (except 741.171/52/53)

with drum brakes on the rear axle

Model

463 with rear axle 741 (except 741.52/53)

with drum brakes on the rear axle

Disassemble/assemble rear axle shaft

1

Rear axle shaft

2

Bearing cap

3

Compressed ring

4

Radial shaft sealing ring

5

O-ring

6

Slotted nut

7

Lock washer

8

Polyurethane sealing ring

P35.30-2009-11

Disassemble/assemble rear axle shaft
Disassemble/assemble rear axle shaft

P35.30-2010-01

Rotation direction of rear axle shaft (1) in direction of arrow

Retainer of slotted nut (6)

P35.30-2012-01

Remove

1

Remove rear axle shaft (1).

AR35.30-P-0620G

Disassemble

2

Clamp rear axle shaft (1) before disassembling.


On vehicles with anti-lock braking system (ABS), do not damage the ring gear.
Otherwise, the anti-lock braking system (ABS) will malfunction.

Screw in two wheel bolts and clamp them in a vise.

3

Release and remove slotted nut (6).

The slotted nut (6) with turned groove has a left-hand thread.

Pronged wrench

*460589010700

4

Detach lock washer (7).

5

Press off tapered roller bearing together with bearing cap (2), radial shaft sealing ring (4) and compressed ring (3) from rear axle shaft (1).

The compressed ring (3) forms a unit together with the polyurethane sealing ring (8), the O-ring (5) and the radial shaft sealing ring (4).

Assembly plate

*460589013500

6

Detach O-ring (5) from compressed ring (3).

Assemble

7

Slide bearing cap (2) and compressed ring (3) onto rear axle shaft (1).

Pack cavity between dust lip and sealing lip with grease, apply light coating of grease to polyurethane sealing ring (8).

Long-life grease

*BR00.45-Z-1001-06A

8

Press tapered roller bearing onto rear axle shaft (1).


The flange ring of the L-shaped bearing must point toward the compressed ring (3).
Otherwise, the factory-set bearing play will become impermissible.

To do so, heat up tapered roller bearing to approx. 80 °C.

9

Lightly grease O-ring (5) and fit onto compressed ring (3).

Replace O-ring (5).

Long-life grease

*BR00.45-Z-1001-06A

10

Apply grease to tapered roller bearing.

Long-life grease

*BR00.45-Z-1001-06A

11

Position lock washer (7).

Replace locking plate (7).

12

Attach slotted nut (6).


On vehicles with anti-lock braking system (ABS), do not damage the ring gear.
Otherwise, the anti-lock braking system (ABS) will malfunction.

The slotted nut (6) with turned groove has a left-hand thread.

Slotted nut to rear axle shaft

*BA35.30-P-1002-01C

Torque wrench

*001589742100

Pronged wrench

*460589010700

13

Secure slotted nut (6) with lock washer (7) at both grooves.

Secure slotted nut (6) so that both directions of rotation are locked (see arrows on axle shaft and picture above).

14

Unclamp rear axle shaft (1) from vise and remove wheel bolts.


On vehicles with anti-lock braking system (ABS), do not damage the ring gear.
Otherwise, the anti-lock braking system (ABS) will malfunction.

Install

15

Install rear axle shaft (1).

AR35.30-P-0620G

Rear axle shaft

Number

Designation

Model 460, 461, 463
with drum brake

Model 461
with disk brake
Model 463
up to model year 2019
with disk brake

BA35.30-P-1002-01C

Slotted nut to rear axle shaft

Nm

500

500

Disassemble/assemble rear axle shaft
Disassemble/assemble rear axle shaft
Disassemble/assemble rear axle shaft

001 589 74 21 00

Torque wrench

460 589 01 07 00

Pronged wrench

460 589 01 35 00

Assembly plate

Repair materials

Number

Designation

Order number

BR00.45-Z-1001-06A

Long-life grease

A 000 989 63 51 11

Henviste dokumenter