Remove/install control arm elastomer bearing

AR35.15-D-0202H

Remove/install control arm elastomer bearing

28.09.2018

Rear axle

741.412/415 in model 906.11/13/21/23/61/63/71/73

with code PL9 (Air suspension, company VB-Airsuspension)

Rear axle

741.413/414/416/420 in model 906.15/25/65

with code PL9 (Air suspension, company VB-Airsuspension)

Rear axle

741.421/423 in model 906.11/13/21/23/61/63/71/73

with code PL9 (Air suspension, company VB-Airsuspension)

Rear axle

741.422/453/454/455 in model 906.15/25/65

with code PL9 (Air suspension, company VB-Airsuspension)

1

Elastomer bearing

5

Control arm

Shown on model 906.13

3

Ball joint

4

Nut

5

Control arm

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Topical note

Notes on air suspension

AH32.22-N-1000-01H



Remove

1

Raise vehicle

AR00.60-D-1000H

2

Mark position of control arm (5) relative to ball joint (3)

3

Undo the nut (4) by approx. 3 turns

4

Detach control arm (5) on the opposite side of the ball joint (3)

Rear axle 741.412/415/421/423 in model 906.11/13/21/23/61/63/71/73
with code PL9 (Air suspension, company VB-Airsuspension)

AR35.15-D-0200H

Rear axle 741.413/414/416/420 in model 906.15/25/65
with code PL9 (Air suspension, company VB-Airsuspension)
Rear axle 741.422/453/454/455 in model 906.15/25/65
with code PL9 (Air suspension, company VB-Airsuspension)

AR35.15-D-0200HA

5

Unscrew control arm (5) from ball joint (3)

6

Press out elastomer bearing (1) on workshop press using drift



Install

7

Press elastomer bearing (1) centrally into control arm (5)

 Insertion drift

*405589171500

8

Screw control arm (5) up to marked position on ball joint (3)

9

Attach control arm (5) on the opposite side of the ball joint (3)

Rear axle 741.413/414/416/420 in model 906.15/25/65
with code PL9 (Air suspension, company VB-Airsuspension)
Rear axle 741.422/453/454/455 in model 906.15/25/65
with code PL9 (Air suspension, company VB-Airsuspension)

AR35.15-D-0200HA

Rear axle 741.412/415/421/423 in model 906.11/13/21/23/61/63/71/73
with code PL9 (Air suspension, company VB-Airsuspension)

AR35.15-D-0200H

10

Tighten nut (4)

 Jam nut, ball joint to on bar link

*BA32.22-N-1008-03H

11

Lower vehicle

 Air suspension

Number

Designation

Model 906 with code PL9 (Air suspension from VB Air suspension)

BA32.22-N-1008-03H

Jam nut, ball joint to on bar link

Nm

60