ar3330s7140p

Remove/install radial shaft sealing rings on side of front axle differential

Type ar · emne 33.30 · version 0103 · 2020-03-12

Gælder for: Model 470, 471 with engine 642.8 Model 470, 471 with engine 699.3 with code ZG3 (Engageable all-wheel drive with gear reduction)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 33 Foraksel › 33.30 Drev, differentiale, drivaksel — Serie 470 · Serie 471

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.51 Aksel/drivaksel — Serie 470 · Serie 471

Gælder også for motorer/gearkasser: 642 8**, 699 3**

AR33.30-S-7140P

Remove/install radial shaft sealing rings on side of front axle differential

06.03.2020

Model

470, 471 with engine 642.8

Model

470, 471 with engine 699.3

with code ZG3 (Engageable all-wheel drive with gear reduction)

Remove/install radial shaft sealing rings on side of front axle differential

Shown on model 470 with engine 699.3 on left side of vehicle

1

Radial shaft sealing ring

2

Front axle transmission

S33.30-4548-06

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Remove

1

Drain off front axle differential oil.

AP33.00-S-3301P

2

Remove corresponding front axle shaft.

AR33.30-S-6530P

3

Remove radial shaft sealing ring(1) using suitable tool.


Do not use any sharp-edged tool.
Otherwise, the seat of the radial shaft sealing ring (1) may be damaged.

4

Clean seat and sealing area of radial shaft sealing ring(1).

Assembly cleaner

*BR00.45-Z-1028-04A

5

Check seat and sealing area of radial shaft sealing ring(1) in front axle differential(2) for damage and galling.

If damage and galling is detectable.

Replace front axle differential(2).


AR33.30-S-0525P

Install

6

Apply coating of grease to sealing and dust lip of new radial shaft sealing ring (1).

Molykote BR 2 plus grease

*BR00.45-Z-1081-06A

7

Moisten circumference of radial shaft sealing ring(1) with transmission oil.

Commercial vehicle hypoid gear oil mineral oil (specification 235.20)

BB00.40-P-0235-20A

8

Position radial shaft sealing ring(1) on seat in front axle differential(2).

9

Press in radial shaft sealing ring(1) until the radial shaft sealing ring(1) fits flush with the rear end stop in the front axle differential(2).

Drift set

*470589081500

Handle

*001589004000

10

Install corresponding front axle shaft.

AR33.30-S-6530P

11

Add front axle differential oil.

AP33.00-S-3301P

Check for leak test first before fully lowering vehicle with vehicle lift.

12

Check the front axle differential(2) in the area of the replaced radial shaft sealing ring(1) for leak tightness.

13

Lower vehicle using vehicle lift completely.

Remove/install radial shaft sealing rings on side of front axle differential
Remove/install radial shaft sealing rings on side of front axle differential

470 589 08 15 00

Drift set

001 589 00 40 00

Handle

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

BR00.45-Z-1081-06A

Molykote BR 2 plus grease

Liqui Moly GmbH
Jerg-Wieland-Strasse 4
D-89081 Ulm-Lehr, Germany
www.liqui-moly.de

Henviste dokumenter