Remove/install front axle · ar3310p0100gg · Mercedes-Benz WIS

AR33.10-P-0100GG

Remove/install front axle

12.02.2020

Model	460
Model	461 (except 461.331)
Model	463 (except 463.234/270/271)
	up to model year 2012

4	Transverse control arm
6	Stabilizer bar
11	Nut
15	Nuts
19	Nut

P33.10-2226-06

7	Castle nut
8	Pitman arm
9	Drive flange
14	Propeller shaft
21	Nut

P33.10-2227-06

Shown on left side of vehicle

22	Screw
24	Brake hose
28	Brake line
L6/1	Left front axle rpm sensor
L6/2	Right front axle rpm sensor

P33.25-2031-11

Shown on left side of vehicle

26	Electrical connectors
27	Connection socket
28	Brake line

P33.25-2030-02

1	Trailing arm
13a	Elastomer bearing
13b	Elastomer bearing
13c	Sheet metal washer
19	Nut

P33.15-2078-11

16	Hydraulic line
17	Electrical connector

P33.40-2020-01

1	Trailing arm
4	Transverse control arm
29	Screw
30	Bolts

P33.10-2228-11

 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
 Danger	Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work.	Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system.	AS42.50-Z-0002-01A
 Warning	Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.	Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.	AS00.00-Z-0013-01A
 Caution	Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
Topical note	Notes on avoiding damage through contamination and foreign objects		AH00.00-P-5000-01A
Topical note	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
Topical note	Notes on repairs to brake system		AH42.00-P-0003-01A
Topical note	Brake fluid notes		AH42.50-P-0001-01A
	Remove
1	Raise vehicle and fix in place on vehicle lift.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) as of model year 2010 up to model year 2012	AR00.60-P-1000G
2	Remove front wheels.
			AP40.10-P-4050G
3	Unscrew nuts (15) and remove stabilizer bar (6) from trailing arms (1).
4	Mark installation position of propeller shaft (14) relative to drive flange (9).
5	Detach propeller shaft (14) from drive flange (9).	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331/392) Model 463 (except 463.234/270/271) up to model year 2012 except code 979 (Special protection MB Guard)	AR41.10-P-0050GX
6	Fasten propeller shaft (14) onto frame and secure against falling down.
7	Remove axle ventilation from axle tube.
8	Unscrew hydraulic line (16) from shift cylinder of differential lock and seal openings using suitable stop plugs.	 Record plug	*129589009100
9	Disconnect electrical connector (17) from differential lock indicator switch.	 To do so, unscrew the union nut.
10	Remove brake line (28) from brake hose (24) on left and right side of vehicle, and seal openings using suitable stop plugs.	 The expansion reservoir for brake fluid must not run empty. Otherwise the conditions during bleeding will be difficult.
		 Record plug	*129589009100
11	Remove brake hose (24) from steering knuckle on left and right side of vehicle.
12	Remove bolt (22) on left and right side of vehicle.	Model 461 (except 461.331) with code B02 (Anti-lock braking system (ABS)) Model 463 (except 463.234/270/271) up to model year 2012 with code B02 (Anti-lock braking system (ABS))
13	Unclip electric line from left and right steering knuckle, remove left front axle rpm sensor (L6/1), right front axle rpm sensor (L6/2) from left or right steering knuckle.	Model 461 (except 461.331) with code B02 (Anti-lock braking system (ABS)) Model 463 (except 463.234/270/271) up to model year 2012 with code B02 (Anti-lock braking system (ABS))
14	Release and disconnect electrical connectors (26) of brakepad wear display from socket (27) on left and right side of vehicle.
15	Remove sockets (27) from steering knuckles.
16	Remove cotter pin, unscrew castle nut (7) and pry drag link off steering arm (8).	 Thrust piece	*216589003400
		 Puller	*601589043300
17	Fasten drag link onto frame and secure against falling down.
18	Raise front axle or lower vehicle and remove transverse control arm (4) from frame.
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
		 Remove bolt fastening transverse control arm (4) onto frame with suspension compressed. Otherwise, the bolt will be damaged.
19	Remove shock absorbers from front axle.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012	AR32.25-P-0105GX
20	Remove front axle springs.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012	AR32.20-P-0200GX
21	Unscrew nuts (19) from trailing arms (1), remove sheet metal washers (13c) and elastomer bearings (13b).
22	Lower vehicle until front axle can be removed from trailing arm brackets on frame.	 Removal is made easier if, for example, a pallet is positioned under the vehicle upon which the front axle can then be placed.
23	Remove brake line (28) from brake caliper on left and right side of vehicle, and seal openings with suitable stop plugs.	When replacing the front axle.
			AR42.10-P-0105GG
		 The expansion reservoir for brake fluid must not run empty. Otherwise the conditions during bleeding will be difficult.
		 Record plug	*129589009100
24	Remove bolt (29) and remove transverse control arm (4) from front axle.	When replacing the front axle.
25	Remove bolts (30) and remove trailing arms (1) from front axle.	When replacing the front axle.
26	Check elastomer bearings (13a, 13b) for damage.	If problems exist,
		
		replace elastomer bearings (13a,13b).
	Install
27	Attach trailing arms (1) to front axle, screw in bolts (30) and tighten.	When replacing the front axle.
		 Bolt/nut, trailing arm to axle	*BA33.15-P-1002-01A
28	Mount transverse control arm (4) onto front axle.	When replacing the front axle.
		 Tighten bolt (29) with suspension compressed. Otherwise the elastomer bearings will be torsionally loaded.
29	Attach brake line (28) to brake caliper on left and right side of vehicle.	When replacing the front axle.
			AR42.10-P-0105GG
30	Position front axle under vehicle.
31	Lower vehicle until the trailing arms (1) can be guided into the trailing arm brackets on the frame.	 Aid of helper required.
		 The trailing arms (1) must be in a horizontal position for installation, otherwise the elastomer bearings (13a, 13b) cannot be installed.
32	Install elastomer bearings (13b), sheet metal washers (13c) and tighten nuts (19).	 Nut, trailing arm to frame	*BA33.15-P-1001-01A
33	Install front axle springs.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012	AR32.20-P-0200GX
34	Attach shock absorbers to front axle.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012	AR32.25-P-0105GX
		 To do so, lower vehicle or raise front axle until nuts (21) can be tightened. Observe sequence of stop buffers and sheet metal washers.
		 Nut, shock absorber to front axle	*BA32.25-P-1001-01D
35	Mount transverse control arm (4) onto frame.
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
		 Only tighten nut (11) when vehicle is in ready-to-drive condition with suspension compressed. Otherwise the elastomer bearings will be torsionally loaded.
		 To do so, lower vehicle or lift front axle until screw can be installed without being tilted.
36	Remove support plate and major assembly mount.
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
37	Attach stabilizer bar (6) with mounting brackets to trailing arms (1) and tighten nuts (15).	 Nut, stabilizer bar mounting bar to trailing arm	*BA32.35-P-1001-01A
38	Remove retainer of drag link from frame.
39	Mount drag link onto steering arm (8).	 Secure castle nut (7) with a new cotter pin.
		 Castle nut, drag link to pitman arm	*BA46.40-P-1001-04B
40	Mount sockets (27) onto steering knuckles.	 M61	*BA00.10-P-1002-04A
41	Connect and lock electrical connectors (26) of brakepad wear display to socket (27) on left and right side of vehicle.
42	Mount electric line onto left and right steering knuckle, attach left front axle rpm sensor (L6/1), right front axle rpm sensor (L6/2) onto left or right steering knuckle.	Model 461 (except 461.331) with code B02 (Anti-lock braking system (ABS)) Model 463 (except 463.234/270/271) up to model year 2012 with code B02 (Anti-lock braking system (ABS))
43	Screw in bolt (22) on left and right side of vehicle.	Model 461 (except 461.331) with code B02 (Anti-lock braking system (ABS)) Model 463 (except 463.234/270/271) up to model year 2012 with code B02 (Anti-lock braking system (ABS))
		 Self-locking bolt, rpm sensor to steering knuckle	*BA42.30-P-1001-01B
44	Mount brake hose (24) onto left and right steering knuckle.	 A minimum distance of 20 mm must be given between the front axle springs and brake hoses (24) for each wheel position.
45	Mount brake line (28) onto brake hose (24) on left and right side of vehicle.		AR42.10-P-0105GG
46	Mount hydraulic line (16) onto shift cylinder of differential lock.	 Replace seals.
47	Connect electrical connector (17) to differential lock indicator switch.
48	Mount axle ventilation onto axle tube.
49	Remove retainer of propeller shaft (14) from frame.
50	Mount propeller shaft (14) onto drive flange (9).	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 461 (except 461.331/392) Model 463 (except 463.234/270/271) up to model year 2012 except code 979 (Special protection MB Guard)	AR41.10-P-0050GX
		 Observe marking denoting installation position relative to drive flange (9).
		 Bolt, propeller shaft to drive flange	*BA41.10-P-1003-01B
51	Bleed brake system and for proper operation.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012 except code 979 (Special protection MB Guard)	AR42.10-P-0010GG
52	Bleed differential lock hydraulic system.		AR33.40-P-0701GG
53	Install front wheels.
			AP40.10-P-4050G
54	Lower vehicle and release.	Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) up to model year 2012
		Model 460 Model 461 (except 461.331) Model 463 (except 463.234/270/271) as of model year 2010 up to model year 2012	AR00.60-P-1000G
55	Tighten bolt (29) on transverse control arm (4).	When replacing the front axle.
		 Bolt, transverse control arm to axle	*BA33.15-P-1004-01A
56	Tighten nut (11) on transverse control arm (4).	 Nut, transverse control arm to frame	*BA33.15-P-1003-01A
57	Perform chassis alignment.		AR40.20-P-0200AC

 Metric screws/bolts and nuts as per MBN 10 105, 10 143

Number	Designation		8.8	10.9
BA00.10-P-1002-04A	M61	Nm	9	13

 Front axle shock absorber

Number	Designation			Model 460, 461, 463
BA32.25-P-1001-01D	Nut, shock absorber to front axle	M12x1,5	Nm	55
		M14x1,5	Nm	70

 Stabilizer bar/torsion bar

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA32.35-P-1001-01A	Nut, stabilizer bar mounting bar to trailing arm	Nm	50

 Trailing arms, transverse control arms

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1001-01A	Nut, trailing arm to frame	Nm	130

 Trailing arms, transverse control arms

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1002-01A	Bolt/nut, trailing arm to axle	Nm	225

 Trailing arms, transverse control arms

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1003-01A	Nut, transverse control arm to frame	Nm	225

 Trailing arms, transverse control arms

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA33.15-P-1004-01A	Bolt, transverse control arm to axle	Nm	225

 Propeller shaft

Number	Designation		Model 460	Model 461
BA41.10-P-1003-01B	Bolt, propeller shaft to drive flange	Nm	35	35

 Propeller shaft

Number	Designation		Model 463 up to model year 2019
BA41.10-P-1003-01B	Bolt, propeller shaft to drive flange	Nm	35

 Front axle rpm sensor

Number	Designation		Model 461 Model 463 up to model year 2019
BA42.30-P-1001-01B	Self-locking bolt, rpm sensor to steering knuckle	Nm	8

 Drag link

Number	Designation		Model 460, 461 Model 463 up to model year 2019
BA46.40-P-1001-04B	Castle nut, drag link to pitman arm	Nm	140

601 589 04 33 00

Puller

129 589 00 91 00

Record plug

216 589 00 34 00

Thrust piece

Henviste dokumenter

ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
ah0000p500001a Oplysninger om forebyggelse af skader på grund af snavs og fremmedlegemer
ah4200p000301a Oplysninger om reparation af bremsesystem
ah4250p000101a Oplysninger om bremsevæske
ap4010p4050g Af-, påmontering og om nødvendigt omplacering af hjul
ar0060p1000g
ar3220p0200gx
ar3225p0105gx
ar3340p0701gg
ar4020p0200ac
ar4110p0050gx
ar4210p0010gg
ar4210p0105gg
as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
as0000z001301a Fare for kvæstelser på hud og øjne på grund af sprøjtende hydraulikvæske, som erunder højt tryk. Forgiftningsfare ved indtagelse af hydralikvæske
as4250z000101a Risiko for forgiftning ved indtagelse af bremsevæske. Risiko for hud- og øjen-skader ved kontakt med bremsevæske
as4250z000201a Fare for ulykker når køretøjet tages i brug første gang på grund af manglende bremseeffekt, når driftsbremse betjenes første gang efter reparationsarbejde
ws0100p0092b
ws2600p3309b