Remove/install stabilizer link on front axle

AR32.35-W-2202A

Remove/install stabilizer link on front axle

26.06.2020

Model

956 with front axle 739.5

Model

963, 964 with front axle 739.5

1

Stabilizer link

2

Screw

3

Bearing cap

4

Screw

5

Bearing bracket

6

Front axle

7

Nut

8

Elastomer bearing (with bolt)

9

Bearing

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A



Remove

1

Move vehicle air suspension to driving level and park vehicle.

2

Mark installation position of elastomer bearings (8) relative to stabilizer link.

3

Remove nuts (7) and remove bolts (4).

4

Loosen screws (2) on left and right bearing cap (3).

5

Pull stabilizer link (1) downward and remove bearing brackets (5) from front axle (6).

6

Support stabilizer link (1) between bearing caps (3).

7

Detach screws (2) from bearing caps (3) and remove bearing caps (3).

8

Remove stabilizer link (1).



Check

9

Check right and left bearing (9) for damage and wear.

If damage or wear is present:



Replace bearings (9).

10

Check elastomer bearings (8) in stabilizer link (1) for damage and wear.

If damage or wear is present:



replace elastomer bearings (8) in stabilizer link (1).

AR32.35-W-2210-05A

 Hand pump

*652589003321

 Hydraulic hose (complete)

*652589003323

 Pulling device

*950589033300

 Supplementary set

*950589003400



Install

11

Mount stabilizer link (1) with bearing brackets (5) onto front axle (6).

 Stabilizer link and bearing bracket to front axle

*BA32.35-N-1002-02H

12

Push stabilizer link (1) into bearings on vehicle frame bearing bracket and support stabilizer link (1).

13

Mount stabilizer link (1) with bearing cap (3) onto vehicle frame bearing bracket.

 Bearing cap of stabilizer link to vehicle frame bearing bracket

*BA32.35-N-1001-02H

 Front axle stabilizer bar

Number

Designation

Model 956 with front axle 739.5

Model 963, 964 with front axle 739.5

BA32.35-N-1001-02H

Bearing cap of stabilizer link to vehicle frame bearing bracket

Stage 1

Nm

225

225

Stage 2

 °

90

90

 Front axle stabilizer bar

Number

Designation

Model 956 with front axle 739.5

Model 963, 964 with front axle 739.5

BA32.35-N-1002-02H

Stabilizer link and bearing bracket to front axle

Stage 1

Nm

330

330

Stage 2

 °

90

90