Remove/install front stabilizer bar

AR32.35-S-2050S

Remove/install front stabilizer bar

13.7.10

1.12.09

Method modified

Step 11

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove air filter housing

Only without code (ZG2) Permanent all-wheel drive

Model 639 with engine 112, 272, 646

AR09.10-S-1150S

Model 639 with engine 642

AR09.10-S-1150SE

2

Remove engine air intake duct downstream of air filter

Only with engine 642

AR09.10-S-8130SE

3

Remove bolts (9) of engine mounts

Only without code (ZG2) Permanent all-wheel drive

AR22.10-S-1100S

4

Remove engine covers

Only with engine 642

AR01.10-S-2405SE

5

Put on engine support clamp

Only without code (ZG2) Permanent all-wheel drive

AR33.10-S-0100-01S

 Lift engine carefully to avoid causing damage.



*BA62.30-N-1006-01A

Only with engine 642



*BA01.20-N-1003-01O

 Engine hoist

*639589006100

 Strut

*639589016300

Only with engine 642

 Strut

*906589036100

6

Detach left front wheel

Only without code (ZG2) Permanent all-wheel drive

AR40.10-S-1100S

7

Detach rear lower engine compartment paneling

Only for model 639.7/8 as of VIN 055347

AR61.20-S-1105-03S

8

Remove link rods on stabilizer bar (8)

AR32.35-S-3328S

9

Unhook electrical connectors (2) from bracket (4)

Only with engine 112, 272

10

Remove bracket (4)

Only with engine 112, 272 with transmission 722.6

 To do this, remove bolts (3).



*BA27.10-N-1001-04A

11

Remove bearing shells (6)

Model 639 up to VIN 007991 with engine 112, 646 with code (D03) Roof and rear-end doors, high version,

code (CL0) lowerable and raisable rear air suspension,

Model 639 up to VIN 039908 with engine 112, 646 without code (D03) Roof and rear-end doors, high version,

without code (CL0) lowerable and raisable rear air suspension

AR32.35-S-0310S

Model 639 as of VIN 007992 with engine 112, 646 with code (D03) Roof and rear-end doors, high version,

code (CL0) lowerable and raisable rear air suspension,

without code (XZ1) Model generation 1,

Model 639 as of VIN 039909 with engine 112, 646 without code (D03) Roof and rear-end doors, high version,

without code (CL0) lowerable and raisable rear air suspension,

without code (XZ1) Model generation 1,

Model 639 with engine 272, 642 without code (XZ1) Model generation 1

AR32.35-S-0310SA

12

Remove stabilizer bar (8)

 On vehicles without CODE (ZG2) Permanent all-wheel drive, remove the stabilizer bar (8) to the left.

13

Install in the reverse order

Number

Designation

Engine
642

BA01.20-N-1003-01O

Bolt, bracket to cylinder head

M612

Nm

9

Number

Designation

Model
636, 639
with transmission
722.6

BA27.10-N-1001-04A

Automatic transmission to engine

M10

Nm

38

Number

Designation

Model
636, 639

BA62.30-N-1006-01A

Bolt, frame to front module reinforcement

M8

Nm

25