ar3235s0310s

Remove/install anti-sway bar mount of anti-sway bar on front axle

Type ar · emne 32.35 · version 0114 · 2010-05-27

Gælder for: MODEL 639.### ## up to 007991 with ENGINE 112, 646 with CODE (D03) Roof and rear-end doors, high version with CODE (CL0) Rear air suspension, lowerable and liftable MODEL 639.### ## up to 039908 with ENGINE 112, 646 except CODE (D03) Roof and rear-end doors, high version except CODE (CL0) Rear air suspension, lowerable and liftable

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 32 Affjedring › 32.35 Stabilisator — Serie 639 · Serie 646

EinPAS 17 Drivstreng/aksel › 17.50 Foraksel › 17.50.41 tværgående styrestang/styring/stabilisator — Serie 639 · Serie 646

Gælder også for motorer/gearkasser: 112 ***

AR32.35-S-0310S

Remove/install anti-sway bar mount of anti-sway bar on front axle

26.5.10

MODEL 639.### ## up to 007991 with ENGINE 112, 646
with CODE (D03) Roof and rear-end doors, high version
with CODE (CL0) Rear air suspension, lowerable and liftable

MODEL 639.### ## up to 039908 with ENGINE 112, 646
except CODE (D03) Roof and rear-end doors, high version
except CODE (CL0) Rear air suspension, lowerable and liftable

Remove/install anti-sway bar mount of anti-sway bar on front axle

S32.35-4502-06

Shown on vehicle with ENGINE 112 without code (D03) Roof and rear-end doors, high version and without code (CL0) lowerable and raisable rear air suspension up to vehicle ident number (VIN) 039908

2 Bracket

3 Rubber bushing

Remove/install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Detach rear lower engine compartment paneling

Only for model 639.7/8 as of VIN 055347

AR61.20-S-1105-03S

2

Detach left and right bracket (2)

If necessary bend heat shield slightly to one side.

*BA32.35-N-1003-02B

3

Detach both rubber mounts (3) from anti-sway bar

Check

4

Check anti-sway bar and rubber mounts (3) for wear and damage

Replace worn or damaged rubber mounts (3). If the anti-sway bar reveals significant galling, caused by the rubber mounts (3), replace anti-sway bar:

Remove/install front anti-roll bar

AR32.35-S-2050S

5

Install in the reverse order

Front axle anti-sway bar

Number

Designation

Model 636, 639
with engine 646

BA32.35-N-1003-02B

anti-sway bar to subframe

M8

Stage 1

Nm

20

Stage 2

°

60

M10

Nm

60

Front axle anti-sway bar

Number

Designation

Model
639
with engine 112,
with code
D03, CL0
up to VIN 010482

Model
639
with engine 112,
without code
D03, CL0
up to VIN 039908

BA32.35-N-1003-02B

anti-sway bar to subframe

M8

Stage 1

Nm

20

20

Stage 2

°

60

60

M10

Nm

-

60

Henviste dokumenter