Remove/install power take-off

AR26.45-G-0004ADA

Remove/install power take-off

05.09.2018

Transmission

715.356/366/376/386/536/537/538/539 in model 800

Power take-off 121

1

Oil pump end cover

2

Drive shaft

3

Ball bearing

4

Retaining ring

5

Centering ring

6

Seal

7

Power take-off

8

Electrical connector (power take-off 1 indicator switch (S2))

9

Compressed-air line

10

Electrical connector (power take-off 1 solenoid valve (Y8))

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on compressed air connection systems

AH00.18-N-0001-01A

 

Remove/install

1

Depressurize compressed-air system.

 See information from body manufacturer.

2

Drain fluid from transmission.



AP26.00-G-2601OH

3

Detach output flange from transmission.

Transmission 715.376/386/537/538/539

AR26.50-G-2000AE

Transmission 715.536 in model 800.1

AR26.50-G-2000OH

Transmission 715.536 in model 800.2/3

AR26.50-G-2000H

Transmission 715.356/366

AR26.50-G-2000AD

4.1

Detach propeller shaft from power take-off (7).

For power take-off with propeller shaft

 Propeller shaft to power take-off

*BA26.45-N-1007-04A

4.2

Remove hydraulic pump.

On power take-off with hydraulic pump

AR26.45-G-0002ADA

 Do not separate hydraulic lines if possible, collect hydraulic fluid if necessary.

5

Detach compressed-air line (9) from power take-off (7).

 Installation: Replace O-rings.

6

Disconnect electrical connector (10) from power take-off 1 solenoid valve (Y8).

 Mark the installation location of the electrical connector (10).

 Installation: Observe the marking for the electrical connector (10).

7

Disconnect electrical connector (8) from power take-off 1 indicator switch (S2).

 Mark the installation location of the electrical connection (8).

 Installation: Note the marking for the electrical connection (8).

8

Remove power take-off (7).

 Installation: Replace seal (6).

 Screw/bolt, power take-off to transmission

*BA26.45-N-1003-04A

9

Remove drive shaft (2) together with ball bearing (3) and centering ring (5).

10

Remove oil pump cap (1).

Only when exchanging the transmission or retrofitting a power take-off.



Check

11

Check drive shaft (2) and ball bearing (3) for wear

In the event of a problem,



Replace drive shaft (2) or ball bearing (3).

12

Install in the reverse order.

 Power take-off

Number

Designation

Transmission 715 with PTO 121

BA26.45-N-1003-04A

Screw/bolt, power take-off to transmission

8.8

Nm

50

10.9

Nm

60

 Power take-off

Number

Designation

Transmission 715 with PTO 121

BA26.45-N-1007-04A

Propeller shaft to power take-off

M8

Nm

25

M10

Nm

60

M12

Nm

100