ar2645g0002ada

Remove/install hydraulic pump

Type ar · emne 26.45 · version 0100 · 2018-09-10

Gælder for: Transmission 715.316/356/366/376/386/536/537/538/539 in model 800 Power take-off 121

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.45 Kraftudtag, kraftudtagsdrev — Serie 800

EinPAS 17 Drivstreng/aksel › 17.45 Kraftudtag › 17.45.40 oliepumpe/oliekanal/oliefilter/oliekøling — Serie 800

Gælder også for motorer/gearkasser: 715 316, 715 356, 715 366, 715 376, 715 386, 715 536, 715 537, 715 538, 715 539

AR26.45-G-0002ADA

Remove/install hydraulic pump

28.08.2018

Transmission

715.316/356/366/376/386/536/537/538/539 in model 800

Power take-off 121

Remove/install hydraulic pump

1

Hydraulic pump

2

Nut

3

Seal

4

Adapter

W26.45-0064-11

Warning

Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure.Risk of poisoning from swallowing hydraulic fluid.

Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Remove/install

1

Disconnect hydraulic lines from hydraulic pump (1).

Collect hydraulic fluid which flows out in a suitable vessel.

2

Remove hydraulic pump (1) and adapter (4).

Collect escaping hydraulic fluid or transmission oil with suitable containers.

Installation: Clean sealing surfaces and replace seals (3).

Nut, hydraulic pump to power take-off

*BA26.45-N-1009-04A

3

Install in the reverse order.

Check

4

Check hydraulic fluid level in oil container; correct if necessary.

See operator's manual and maintenance procedures of the body manufacturer.

5

Check transmission oil level, correct, if necessary.

AP26.00-G-2601OH

Power take-off

Number

Designation

Transmission 715 with PTO 121

BA26.45-N-1009-04A

Nut, hydraulic pump to power take-off

Nm

70

Henviste dokumenter