Removing, installing shaft seals · ar2640s0001a · Mercedes-Benz WIS

AR26.40-S-0001A

Removing, installing shaft seals

12.7.95

ENGINE 111.948 /950 /978 /980, 601.942 /970, 611.980 in MODEL 638 except CODE (G40) Automatic transmission

S33.30-3002-07

S26.40-1002-01

S26.40-1001-01

1 Right radial shaft seal

2 Left radial shaft seal

3 Drive shaft (right)

4 Screw

5 Screw

6 Drive shaft (left)

 	Removing, installing
1	Drain transmission fluid	 Drain approx. 0.5 - 1.0 liters.
			AP26.00-D-2601A
2	Remove left drive flange		AR33.30-S-1000A
3	Remove middle drive shaft with bearing	 Right side of vehicle with engine 611.980.	AR33.30-S-7706C
	Remove middle drive shaft with bearing	 Right side of vehicle with engine 111 and engine 601.	AR33.30-S-7706M
4	Remove left radial shaft seal (2).	Installation: Check sealing ring seat for damage. Coat sealing lip of radial shaft seal (2) with oil.
		 Drift punch	*638589051500
	Remove right radial shaft seal (1).	Installation: Check sealing ring seat for damage. Coat sealing lip of radial shaft seal (1) with oil.
		 Drift punch	*638589061500
5	Install in the reverse order
	Inspecting
6	Check transmission oil level, top up if necessary.
			AP26.00-D-2601A

638 589 05 15 00

638 589 06 15 00

Drift punch