AR25.20-D-0070-01A | Bleeding clutch control with bleeder unit | ||
Danger! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury from contusions and burns if you insert your hands into the engine when it is started or when it is running | Secure vehicle to prevent it moving off. |
Clutch control
Number | Designation | Engine 601.943 | Engine 602.980/ | |
BA25.20-N-1004-01A | Bleed screw to clutch slave cylinder | Nm | 16 | 16 |
Clutch control
Number | Designation | Engine 111.979 | Engine 111.984 | |
BA25.20-N-1004-01C | Bleed screw to clutch slave cylinder | Nm | 16 | - |
BA25.20-N-1005-01C | Bleed screw to central clutch operator | Nm | - | 16 |
Clutch control
Number | Designation | Engine | Engine | |
BA25.20-N-1001-01D | Bleed screw to central clutch operator | Nm | 16 | 16 |
Commercially available tools
Number | Designation | |
WH58.30-Z-1001-24A | Bleeder unit, pneumatic | |
WH58.30-Z-1002-24A | Bleeder unit, electric |
D29.10-0003-01
1 Lower fluid level in expansion reservoir.
Do not empty expansion reservoir completely so that air does not enter the brake system.
2 Set bleeder unit to the lowest possible pressure.
D29.10-0004-01
Figure does not apply for transmission 711.605/62 (see below)
3.1 Connect pressure line of bleeder unit to bleed screw (arrow) of slave cylinder.
Bleed the clutch from bottom to top.
4.1 Open bleed screw (arrow).
5.1 Carry out bleeding operation Watch the expansion reservoir to ensure that the brake fluid does not overflow.
D25.20-0003-01
Position of bleed screw (arrow) for transmission 711.605/620/621:
3.2 Connect pressure line of bleeder unit to bleed screw (arrow) of central clutch operator.
Bleed the clutch from bottom to top.
4.2 Open bleed screw (arrow).
5.2 Carry out bleeding operation Watch the expansion reservoir to ensure that the brake fluid does not overflow.
6 End bleeding operation if the brake fluid level approaches the maximum level in the expansion reservoir. Close pressure line at bleed unit and bleed screw at slave cylinder or central clutch operator .
7 Disconnect pressure hose from bleed screw.
8 Check coupling for clearance when engine is running by engaging the reverse gear.
9 Check function of control system and check system for leaks.
10 Top up brake fluid in expansion reservoir to maximum level. Use brake fluid according to Specifications for Service Products sheet 331.0.
Henviste dokumenter
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører