W20.40-0004-09
1 | Radiator | 4 | Coolant hose | 7 | Cables' clamp | ||
2 | Fan cover | 5 | Coolant hose | Seta A | Upper supports | ||
3 | Coolant hose | 6 | Coolant hose | Seta B | Lower brackets |
| Remove/install | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Topical note | Notes on coolant | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
1.1 | Tilt the cabin | In vehicles with Code (F30) Tilting hydraulics for cab. | |
Topical note | Notes on tilting the cab | ||
1.2 | Tilt the cab to the repair position | In vehicles without Code (F30) Tilting hydraulics for cab. | |
Topical note | Notes on tilting the cab | ||
. | |||
2 | Remove the chassis acoustic encapsulation top at left and right sides | ||
3 | Drain the coolant at the radiator (1) |
| |
Installation: Return cab to its original position only after tightness test. | |||
4 | Remove the coolant hose (3) at the radiator (1) | Remove the cable's clip. | |
5 | Remove the coolant hose (4) at the radiator (1) and separate the coolant hose (5) | Collect the drained coolant. | |
6 | Tie the coolant hoses (3, 5) to the engine | Collect the drained coolant. | |
7 | Separate the coolant hose (6) from the radiator (1) | ||
8 | Remove the cables' clamp (7) from the coolant hose (6) at the fan's cover (2) | ||
9 | Unlock the fan cover (2) at both upper supports (arrow A), remove and lift up the bottom supports (arrow B) | Installation: Firstly insert new cable clips (7) for coolant hose fastening (6) at the fan's cover (2) and afterwards install it at the fan's cover (2). | |
10 | Install in reverse order |
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ah6080n000301a Oplysninger om tipning af førerhus
- ar2000b1142tj
- ar6080b0010tb
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske
- as6080z000101a Fare for personskade ved fastklemning og knusning, når førerhuset tippes