P20.00-2199-09
Connection diagram
1 Vent line
4 Exhaust air line
5 Compressed-air connection
2 Connecting line of vacuum box
3 Outlet line
P58.30-2021-04
6 Venturi nozzle
7 Pressure tube
M Connection
U Connection
P20.00-2230-01
8 Maximum mark
Connecting | |||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
1.1 | Screw on the connection (M) at the pressure tube (7) of the venturi nozzle (6) | During first assembly of the venturi nozzle. | |
The venturi nozzle (6) will lose its function if used without the pressure tube (7). The venturi nozzle (6) does not generate a vacuum, but creates excess pressure at connection (U) if the compressed air is connected without the pressure tube (7). | |||
2 | Connect cooler vacuum filling device according to connection diagram | Cooler vacuum filling device | |
NTKL adapter | |||
3 | Close all valves on the ventilation device. | ||
4 | Prepare the low temperature circuit for the bleeding process | ||
| Notes on coolant | All engines | |
Bleeding | |||
5 | Bleed low temperature circuit with cooler vacuum filling device | ||
| Notes on coolant | All engines | |
Cooler vacuum filling device | |||
6 | Actuate low temperature circuit with STAR DIAGNOSIS | Actuate the left charge air cooler circulation pump (M44/1) and right charge air cooler circulation pump (M44/2) using STAR DIAGNOSIS and allow to run for 45 seconds. | |
STAR DIAGNOSIS diagnosis system | |||
Disconnecting | |||
7 | Close the cooler vacuum filling device | ||
8 | Fill up fill level in the expansion reservoirs up to the maximum mark (8) | An excessively high fill level can prevent full purge of the system. | |
An incompletely purged system can lead to cutting out of the compressor charging due to different temperature conditions. |
285 589 01 21 00
NTKL Adapter
Vacuum-type cooling system filler
285 589 00 21 00
Commercially available tools
Henviste dokumenter
- ah2000n208001a Oplysninger om kølervæske
- ar2000p114502slr
- ar2000p114503slr
- as2000z000101a Risiko for skoldningsskader på hud og øjne pga. sprøjtende, varm kølervæske. Risiko for forgiftning ved indtagelse af kølervæske