ar0941s6817b

Removing and installing charge air cooler

Type ar · emne 09.41 · version 0100 · 1999-01-18

Gælder for: ENGINE 611.980 in MODEL 638.094 /194 /294 with CODE (MQ4) Engine OM611 DE22 LA (75 kW) with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.41 Ladeluftrør/ladeluftkøling — Serie 611 (modeller 980) · Serie 638 (modeller 094, 194, 294)

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.45 Ladeluftkøler — Serie 611 (modeller 980) · Serie 638 (modeller 094, 194, 294)

AR09.41-S-6817B

Removing and installing charge air cooler

15.10.98

ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)

Removing and installing charge air cooler

S09.41-2503-06

1 Radiator

2 Intercooler

3 Locking pin

M34.1 Connector of engine radiator fan

Removing, installing

1

Disconnect ground cable of battery

AR54.10-S-0005A

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

2

Drain coolant

AR20.00-S-1142A

3

Remove radiator (1)

AR20.20-S-3865D

4

Remove locking pin (3)

5

Turn intercooler (2) at the side and remove from the bottom guide at radiator (1)

5

Remove fan of intercooler

Thoroughly clean connection points otherwise the charge air hoses may be forced off in operation.

AR09.41-S-6820A

6

Install in the reverse order

Henviste dokumenter