Remove/install oil feed line for turbocharger

AR09.40-P-6022MRT

Remove/install oil feed line for turbocharger

09.05.2018

Engine

256.9 in model 222

2

Screw

5

Oil feed line

3

Screw

6

Screw

4

Screw

 Warning

Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust.

Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area.

AS49.00-Z-0001-01A

 Caution

Risk of injury to skin and eyes due to handling of engine oil. Risk of poisoning caused by swallowing engine oil

Wear protective gloves, protective clothing and safety glasses.
Do not fill engine oil into beverage containers.

AS18.00-Z-0001-01A

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

 

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405MRT

 Installation: Only install upper engine cover after the leak test.

2

Unscrew the bolt (2, 3, 4, 6).

 Screw, oil feed line to

*BA09.40-P-1006-02MRT

3

Remove the oil feed line (5) and seal the openings with suitable stop plugs.

 Installation: Install new sealing rings.

 Record plug

*129589009100

4

Install in the reverse order.

5

Check engine oil level and correct.



AP18.00-P-1812SKI

 Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check engine for proper leaktightness and leaktightness.

7

Install upper engine cover.

AR01.10-P-2405MRT

 Turbocharger

Number

Designation

Engine 256.9

BA09.40-P-1006-02MRT

Screw, oil feed line to

exhaust gas turbocharger/cylinder head/bracket

Stage 1

Nm

8

Stage 2

 0

60

Heat shield

Nm

8