ar0910p1150oid

Remove/install air filter housing

Type ar · emne 09.10 · version 0100 · 2019-01-02

Gælder for: Engine 656 in model 167

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 09 Luftindsugning, luftladning › 09.10 Luftfilter — Serie 167 · Serie 656

EinPAS 15 Motor › 15.30 Luftindsugning/opladning › 15.30.40 luftfilter/luftfilterkasse — Serie 167 · Serie 656

AR09.10-P-1150OID

Remove/install air filter housing

18.12.2018

Engine

656 in model 167

Remove/install air filter housing

P09.10-2463-09

1

Air cleaner housing

4

Engine air intake duct

7

Screw

2

Engine cover

5

Clamp

3

Engine cover

6

Electrical wiring harness

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove engine cover (2).

AR01.10-P-2405OID

2

Remove engine cover (3).

AR01.10-P-2405OID

3

Unclip clamp (5) on air filter housing (1).

Mounting wedge

*110589035900

4

Remove CDI control unit (N3/9) on air filter housing (1) and place to one side with electrical lines connected

AR07.08-P-7013OID

5

Unclip electrical wiring harness (6) at the air filter housing (1).

Mounting wedge

*110589035900

6

Unclip engine air intake duct (4) from the air filter housing (1) on both sides and remove.

Mounting wedge

*110589035900

7

Remove engine air intake duct from the air filter housing (1) downstream of the air filter.

AR09.10-P-8130OID

8

Loosen screw (7).

Bolt, elastomer bearing for air filter housing to charge air cooler

*BA09.10-P-1001-01P

9

Lift air filter housing (1) and remove in upward direction

Installation: Replace seal on air filter housing (1).

Installation: Coat rubber mount with lubricant paste.

Lubricant, rubber assembly 1 l

*BR00.45-Z-1010-06A

10

Check rubber mount on the air filter housing (1) for damage and correct seating.

If problems exist,

Replace rubber mount on air filter housing (1) or position correctly.

11

Install in the reverse order.

Air filter

Number

Designation

Engine 656

BA09.10-P-1001-01P

Bolt, elastomer bearing for air filter housing to charge air cooler

M6

Nm

8

Remove/install air filter housing

110 589 03 59 00

Mounting wedge

Repair materials

Number

Designation

Order number

BR00.45-Z-1010-06A

Lubricant, rubber assembly 1 l

A 000 989 03 67

Henviste dokumenter