Measure fuel return quantity at the fuel tank · ar0715g200003dd · Mercedes-Benz WIS

AR07.15-G-2000-03DD	Measure fuel return quantity at the fuel tank
 Danger	Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
 Warning	Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.	Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
	Notes on possible sources of fault in the low-pressure fuel circuit		AH07.15-N-1000-02F

Engine	900.91/92 in model 000.001
Engine	902.91/93 in model 000.001
Engine	904.94/95/96/97 in model 000.001
Engine	906.93/94/95/96/98/99 in model 000.001
Engine	924.91/93/94 in model 000.001
Engine	925.9 in model 000.001
Engine	926.91/92/93/95/97/98 in model 000.001

Check values for fuel pressure

Number	Designation			Engine 900.9, 904.9, 924.9, 925.9, 926.9, engine 902.9, 906.9 except natural gas engine
BE47.00-N-1002-01B	Fuel return quantity at fuel tank	Idling speed	l/min	0,9...2,0
		Breakaway speed	l/min	2,0...10,5

Measure

1	Unclip and disassemble cover (2) on fuel filler neck.

2	Unlock and detach fuel return line (1) from fitting of the fuel fill level sensor.

 Collect fuel which runs out in a suitable container.

3	Insert transparent fuel line (3), as shown, into connector of fuel return line (1). Guide the other end of transparent fuel line (3) into a suitable measuring container (4).

 The measuring container (4) must have a capacity of at least 6 l and be calibrated.

4	Start the engine and allow to run, catch fuel with the measuring container (4).

 Switch off the engine at idle speed after 1 min or at maximum governed rpm after 30 s.
Slight gas cavities in the returning fuel is normal.
See information from body manufacturer.

5	Read off the fuel quantity on the scale on the measuring container (4). .

6	Remove transparent fuel line (3).

7	Attach fuel return line (1) to the fitting of the fuel fill level sensor with a new sealing ring.

8	Attach cover (2) on filler neck.

W07.15-1396-12

Henviste dokumenter

ah0715n100002f Oplysninger om mulige fejlkilder i lavtryk-brændstofkredsløbet
as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
as4700z000101a Fare for eksplosion ved tænding, fare for forgiftning ved indånding og indtagelse af brændstof samt fare for hud- og øjenskader ved kontakt med brændstof